Can't get XMP to work

[ChinaMan140]

I just built a PC with a 12400F, B660M Gaming X with 3 stics of RAM 16GB DDR4 3200MHz. I just can't get XMP to work. When i enable it the PC Just doesn't boot. Have you guys any sugestions?

 

My RAM is this one: https://www.kabum.com.br/produto/383894/memoria-rise-mode-z-16gb-3200mhz-ddr4-cl16-preto-rm-d4-16g-3200z?gclid=Cj0KCQjw7JOpBhCfARIsAL3bobeublAmjQdrtDKKJAKstambuok59G-MzvlTI3PxLLuesg69wT-I29saAo5UEALw_wcB

 

[Hinjima]

4 minutes ago, ChinaMan140 said:

I just built a PC with a 12400F, B660M Gaming X with 3 stics of RAM 16GB DDR4 3200MHz. I just can't get XMP to work. When i enable it the PC Just doesn't boot. Have you guys any sugestions?

 

My RAM is this one: https://www.kabum.com.br/produto/383894/memoria-rise-mode-z-16gb-3200mhz-ddr4-cl16-preto-rm-d4-16g-3200z?gclid=Cj0KCQjw7JOpBhCfARIsAL3bobeublAmjQdrtDKKJAKstambuok59G-MzvlTI3PxLLuesg69wT-I29saAo5UEALw_wcB

 

3 sticks or 2 sticks of RAM?  Try only 2 sticks.

[Tetras]

You have 3 sticks, is that a typo?

 

When you enable XMP, does it change the memory voltage?

 

What do the sticks boot at?

[Whatisthis]

Make sure the sticks have the same specs too, and as mentioned above try 2 sticks first.

[ChinaMan140]

5 minutes ago, Hinjima said:

3 sticks or 2 sticks of RAM?  Try only 2 sticks.

I tried with 2 and in both configurations, A2/B2 and A1/B1, neither worked.

[ChinaMan140]

19 minutes ago, Tetras said:

You have 3 sticks, is that a typo?

 

When you enable XMP, does it change the memory voltage?

 

What do the sticks boot at?

No it's not a typo. My sister promised me the fourth one but she hasn't bought it yet.

 

I didn't check the voltage since it doesn't boot, and because it doesn't have video I can't tell the voltage.

 

I have to check the exact value, but I think is 2166MHz

Edited November 19, 2023 by ChinaMan140
I didn't answer the full question

[Trevor87]

The ram is not supported by the mouther board. 

[ChinaMan140]

Just now, Trevor87 said:

The ram is not supported by the mouther board. 

What does it mean?

[Trevor87]

5 minutes ago, ChinaMan140 said:

What does it mean?

sorry typo

it not support by your motherboard that means you will have problems running it at it spec or not at all and it might not be stable. 

[ChinaMan140]

17 hours ago, Trevor87 said:

sorry typo

it not support by your motherboard that means you will have problems running it at it spec or not at all and it might not be stable. 

How can I check if is a RAM is supported by the motherboard?

[Trevor87]

https://www.gigabyte.com/Motherboard/B660M-GAMING-X-DDR4-rev-1x/support#dl