Power Indicator Issue!

[Zamihossain]

I have facing some issue.

My PSU is Corsair CV650 80+ Bronze and my GPU is Gigabyte Aorus GTX 1080Ti Extreme.

When i play Dying Light sometimes my White LED indicator of GPU is blinking.

My question is why it’s happening ?

Can anyone help me to fix this issue?

[Hinjima]

9 minutes ago, Zamihossain said:

I have facing some issue.

My PSU is Corsair CV650 80+ Bronze and my GPU is Gigabyte Aorus GTX 1080Ti Extreme.

When i play Dying Light sometimes my White LED indicator of GPU is blinking.

My question is why it’s happening ?

Can anyone help me to fix this issue?

the white blinking means current, voltage or general power fluctuation.
Are you powering the GPU with 1 daisy chain cable or two cables?
EDIT: I see that your PSU only comes with 1 daisy chain cable. Its ok to power a GPU like this but sometimes it can result in unstable power in lower tier PSU's like the CV650.

[Zamihossain]

2 minutes ago, Hinjima said:

the white blinking means current, voltage or general power fluctuation.
Are you powering the GPU with 1 daisy chain cable or two cables?

My PCIe cables is pigtail. i have attached a photo down below please check.

[Zamihossain]

6 minutes ago, Hinjima said:

the white blinking means current, voltage or general power fluctuation.
Are you powering the GPU with 1 daisy chain cable or two cables?
EDIT: I see that your PSU only comes with 1 daisy chain cable. Its ok to power a GPU like this but sometimes it can result in unstable power in lower tier PSU's like the CV650.

Can you tell me please is it ok or Will it damage my GPU?

[Hinjima]

1 minute ago, Zamihossain said:

My PCIe cables is pigtail. i have attached a photo down below please check.

Yep. The white led will blink is getting abnormal power.  You can try to reseat the cables but I doubt that would make much difference.
I will say that I have used Daisy-Chain cables from Corsair a lot throughout the years ( albeit from higher tier units than the CV series :
And not had any issues.  I used a single daisy-chain like you on my RTX 2080 and after overclocking it hard I ran into power limits in certain games ( The issue you are experiencing ). I didn't really mind it as long as the system ran, it just meant I was maybe getting a few FPS less.

[Hinjima]

5 minutes ago, Zamihossain said:

Can you tell me please is it ok or Will it damage my GPU?

are you able to show me exactly where the white LED blinking is on the card?

[Zamihossain]

3 minutes ago, Hinjima said:

Yep. The white led will blink is getting abnormal power.  You can try to reseat the cables but I doubt that would make much difference.
I will say that I have used Daisy-Chain cables from Corsair a lot throughout the years ( albeit from higher tier units than the CV series :
And not had any issues.  I used a single daisy-chain like you on my RTX 2080 and after overclocking it hard I ran into power limits in certain games ( The issue you are experiencing ). I didn't really mind it as long as the system ran, it just meant I was maybe getting a few FPS less.

So if I run my gpu like this and if the white light blinks occasionally, will it be a problem or is there no problem if I run my gpu like this?

[Hinjima]

2 minutes ago, Zamihossain said:

So if I run my gpu like this and if the white light blinks occasionally, will it be a problem or is there no problem if I run my gpu like this?

Its not ideal, it could either be blinking to show an issue with the card or the PSU but its clearly still running so I wouldn't say its critical.
If you are getting over 60fps in Dying Light I would maybe turn on Vsync or limit the FPS to 60 so the card isn't pushed to the max.
Personaly, I wouldnt worry too much about it if it only blinks sometimes and not all the time.

[Zamihossain]

Here is the led blinking sometimes but not every time. When my gpu hit it's max power.