Broken Windows 11 install need help fixing

[TallRocko]

I recently broke my Windows 11 install and I desperately need help fixing it. (how i broke it) Recently I salvaged an nvme from an old laptop then installed it in my PC. then i wiped the drive and cloned my Windows install to it with aomei partition assistant. after cloning it was working well but i have 11gb of unallotted space so i moved it to the main partition. after editing the partition my system locked up and started flickering on the desktop, so i returned to my original drive. when booting off my original drive it put me into recovery, and after attempting to repair it said that it was doing the automated repair and would take around an hour and it was late so i went to bed. when i woke up about 6 hours later it was still doing it, so i powered it off, and now when i boot it says starting repair then the screen goes blank on either drive. when trying to use a known good usb drive to fix it the screen just goes purple.

[Dedayog]

Odd that it would put your original drive into Recovery, since you haven;t done anything to it, right?

 

Is the 2nd salvaged drive in the system as well though?  

 

Booting off the original drive without ANY OTHER drive in the system should result in a back to good status.

[TallRocko]

When I originally tried booting off of the old drive, I left the 2nd hand drive in my system but it still acted the same after I removed it.

[TallRocko]

I found a video showing me how to fix the BCD file that helped me with the errors it was giving me when trying to repair it the traditional way. Here the video https://www.youtube.com/watch?v=wq0mrScd04o

[Fl0yd-]

2 hours ago, TallRocko said:

I found a video showing me how to fix the BCD file that helped me with the errors it was giving me when trying to repair it the traditional way. Here the video https://www.youtube.com/watch?v=wq0mrScd04o

So fixed? If so, mark it solved.