Advice needed - case & vertical gpu mount modding

[johnny45]

for my two nzxt-h5-flow cases  would the Cooler Master Vertical mount MCA-U000R-KFVK03

 

fit with the removable panel on the gpu bracket removed , would it allow for both of my mobo's

 

the gigabyte B550M DS3H & Gigabyte B550 UD AC 2nd an 3rd pci slot to be used while using the vertical bracket

 

id like to know for sure an not just by eyeball'in it

 

id like to know for my Gigabyte B550 UD AC could i use the Sonnet M.2 2x4 Low-profile PCIe Card

& the Inateck PCIe USB 3.2 Gen 2 Extension Card   while using the vertical bracket

 

& for my Gigabyte B550M DS3H be able to use TP-Link 2.5GB PCIe Network Card (TX201
in the 2nd pci slot & the Inateck KU8212 in the 3rd pci slot while using the vertical bracket

Edited June 28, 2023 by johnny45
#2 link broken now fixed

[thrasher_565]

cant use any pci slots with a vertical mount.

 

there was some mounts that allowed for more then one pcie extension so you would need to buy 2 more each.

Edited June 28, 2023 by thrasher_565

[johnny45]

with the removable part gone does it allow at least 2 low profile pci slot to be used at the top ?

 

unless im seeing an counting wrong the h5 flow has 7 slot openings an the mount before the removable part is gone takes up 6

 

so wouldn't that mean with it gone that ther would be just 4 slot openings consumed allowing two low profile pci cards to be used under the top main that

 

would be for the riser cable (fyi im using a 400mm cable) so id have plenty of length to go over an down pass the add-on cards to the gpu