Jump to content

I have a custom loop with these radiators- EK XE 360x60mm and EK PE 360x45mm. If i split my loop into dual setup, which radiator should i use for the CPU and GPU? My specs are in my sig.

 

Thx

I7 12700k - Asus Rog Strix z690-A WiFi D4 - TEAM GROUP 2X16GB DDR4 3600C16 - MSI RTX 3080 Gaming Trio X 10GB - Crucial P5 Pro 500GB PCIe M.2 NVMe Gen4x4 - WD SN850 1TB M.2 NVME Gen4x4 X2 - SanDisk 2TB SSD PLUS 2.5" - Corsair RM850x - Lian Li o11D XL - EK 360mm PE - EK 360mm XE - Heatkiller IV - AC Quantum Vector Trio - AC ultitube 150 D5 pump/res - AC OCTO - AC High FLow - dell s2721dgfa 27" nano IPS 165hz dell p2219h 22" 1920x1080p 75hz

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/
Share on other sites

Link to post
Share on other sites

I'd put the big XE rad on the CPU, a watercooled 3080 stays very cool anyway (I got one !)

 

AMD R9  7950X3D CPU/ Asus ROG STRIX X670E-E board/ 2x32GB G-Skill Trident Z Neo 6000CL30 RAM ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Arctic Liquid Freezer III 360 ARGB cooler/  2TB WD SN850 NVme + 2TB Crucial T500  NVme  + 4TB Toshiba X300 HDD / Corsair RM850x PSU/ Alienware AW3420DW 34" 120Hz 3440x1440p monitor / ASUS ROG AZOTH keyboard/ Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/#findComment-15631590
Share on other sites

Link to post
Share on other sites

22 minutes ago, PDifolco said:

I'd put the big XE rad on the CPU, a watercooled 3080 stays very cool anyway (I got one !)

 

 

Thx. My 3080 does stay very cool, with the 360x45 alone it would probably be fine. I only have the 360x60 on push too, so with push-pull it would be (probably) much better. 

I7 12700k - Asus Rog Strix z690-A WiFi D4 - TEAM GROUP 2X16GB DDR4 3600C16 - MSI RTX 3080 Gaming Trio X 10GB - Crucial P5 Pro 500GB PCIe M.2 NVMe Gen4x4 - WD SN850 1TB M.2 NVME Gen4x4 X2 - SanDisk 2TB SSD PLUS 2.5" - Corsair RM850x - Lian Li o11D XL - EK 360mm PE - EK 360mm XE - Heatkiller IV - AC Quantum Vector Trio - AC ultitube 150 D5 pump/res - AC OCTO - AC High FLow - dell s2721dgfa 27" nano IPS 165hz dell p2219h 22" 1920x1080p 75hz

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/#findComment-15631607
Share on other sites

Link to post
Share on other sites

6 minutes ago, Ozmandias said:

 

Thx. My 3080 does stay very cool, with the 360x45 alone it would probably be fine. I only have the 360x60 on push too, so with push-pull it would be (probably) much better. 

Pushpull doesnt matter one bit unless you have really really bad fans.

 

Realistically in your case it just does not matter which you use as both are well beyond good enough.

 

Whats the reason for dual loopin?

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/#findComment-15631612
Share on other sites

Link to post
Share on other sites

7 minutes ago, jaslion said:

Pushpull doesnt matter one bit unless you have really really bad fans.

 

Realistically in your case it just does not matter which you use as both are well beyond good enough.

 

Whats the reason for dual loopin?

 

Not sure why, just considered it, but it would cost probably another 200 quid on top of the near 700 my loop has already cost. Was going to use 2 of these to do it, then just buy another D5.

https://www.watercoolinguk.co.uk/p/EK-Quantum-Kinetic-FLT-120-D5DDC-Body-D-RGB-Plexi_77182.html

I7 12700k - Asus Rog Strix z690-A WiFi D4 - TEAM GROUP 2X16GB DDR4 3600C16 - MSI RTX 3080 Gaming Trio X 10GB - Crucial P5 Pro 500GB PCIe M.2 NVMe Gen4x4 - WD SN850 1TB M.2 NVME Gen4x4 X2 - SanDisk 2TB SSD PLUS 2.5" - Corsair RM850x - Lian Li o11D XL - EK 360mm PE - EK 360mm XE - Heatkiller IV - AC Quantum Vector Trio - AC ultitube 150 D5 pump/res - AC OCTO - AC High FLow - dell s2721dgfa 27" nano IPS 165hz dell p2219h 22" 1920x1080p 75hz

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/#findComment-15631629
Share on other sites

Link to post
Share on other sites

2 hours ago, jaslion said:

Pushpull doesnt matter one bit unless you have really really bad fans.

 

Realistically in your case it just does not matter which you use as both are well beyond good enough.

 

Whats the reason for dual loopin?

Got a dual loop as well, but with 2 interconnectable AIOs (Alphacool Eisbaer and Eiswolf2) and a VPP (D5 like) pump and 150mm res

I could have made only one, tested it, but thing is the 3080 is cool enough standalone, so having the pump and shorter water circuit is overall better for the CPU than having a full loop.

AMD R9  7950X3D CPU/ Asus ROG STRIX X670E-E board/ 2x32GB G-Skill Trident Z Neo 6000CL30 RAM ASUS TUF Gaming AMD Radeon RX 7900 XTX OC Edition GPU/ Phanteks P600S case /  Arctic Liquid Freezer III 360 ARGB cooler/  2TB WD SN850 NVme + 2TB Crucial T500  NVme  + 4TB Toshiba X300 HDD / Corsair RM850x PSU/ Alienware AW3420DW 34" 120Hz 3440x1440p monitor / ASUS ROG AZOTH keyboard/ Logitech G PRO X Superlight mouse / Audeze Maxwell headphones

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/#findComment-15631757
Share on other sites

Link to post
Share on other sites

2 hours ago, Ozmandias said:

 

Not sure why, just considered it, but it would cost probably another 200 quid on top of the near 700 my loop has already cost. Was going to use 2 of these to do it, then just buy another D5.

https://www.watercoolinguk.co.uk/p/EK-Quantum-Kinetic-FLT-120-D5DDC-Body-D-RGB-Plexi_77182.html

Then don't it's not gonna make a difference part from asthetics if you prefer a dual system.

Link to comment
https://linustechtips.com/topic/1464512-which-rad-for-which/#findComment-15631804
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×