Help please, new build

[Kane1x]

I need help please, I just built a new rig with the following specs.

 

NZXT H7 Elite case

CX-F RGB Series Corsair CX750F RGB PSU

Tuf Gaming X570-Plus (WI-FI) Motherboard 

WD_Black 2TB SSD

4 x XPG Gammix D20 DDR4 32g Ram total 128gb

AMD Ryzen 9 5950X

EVGA GeForce RTX 3080

Lian Li Galahad AIO 360 UNI FAN SL120 edition

 

System fired up  entered BIOS, checked my boot sequence so I could install windows from a usb.

 

Saved bios and rebooted, system booted into installing windows,  entered all choices and suddenly install said, "Can't install windows,  insufficient system requirements ".

 

Rebooted computer with USB stick out to check if "Secure Boot was disabled in UEFI" however when computer started it didn't enter bios and instead said "FAN Error!"  "Press f1 to enter setup"

 

F1 won't do anything,  f2 and delete which enters my boards bios won't do anything. 

 

Any help would be appreciated

[jaslion]

11 or 10?

 

Also just so you know when your pc shuts down during gaming its because of the psu not being enough

[Kane1x]

3 minutes ago, jaslion said:

11 or 10?

 

Also just so you know when your pc shuts down during gaming its because of the psu not being enough

It's windows 11.

 

The computer didn't shut down, I shut it down once windows said it couldn't install, I wanted to enter bios mode again and now it won't 

[jaslion]

5 minutes ago, Kane1x said:

It's windows 11.

 

The computer didn't shut down, I shut it down once windows said it couldn't install, I wanted to enter bios mode again and now it won't 

Oh my remark was for during gaming and a heads up for future issues.

 

Win11 is a pain you need to make sure tpm is installed.

 

The f1 and f2 not working could be as simple as the keyboard not beinf detected once. Are you plugging it and the usb in to the back?

[Kane1x]

9 minutes ago, jaslion said:

Oh my remark was for during gaming and a heads up for future issues.

 

Win11 is a pain you need to make sure tpm is installed.

 

The f1 and f2 not working could be as simple as the keyboard not beinf detected once. Are you plugging it and the usb in to the back?

I will have to try the TPM.

 

Currently my keyboard and mouse are plugged into the front panel USB because on the initial run when it allowed me to try and install windows,  only ghe mouse worked when plugged into the USB in the rear of computer 

[jaslion]

1 hour ago, Kane1x said:

I will have to try the TPM.

 

Currently my keyboard and mouse are plugged into the front panel USB because on the initial run when it allowed me to try and install windows,  only ghe mouse worked when plugged into the USB in the rear of computer 

Front panel is funky and usually has issues so make sure to use the back.

 

Win11 will not install without tpm

[Kane1x]

22 minutes ago, jaslion said:

Front panel is funky and usually has issues so make sure to use the back.

 

Win11 will not install without tpm

Thank you for your help