Can it work ?

[Interect]

So basically I building my pc soon I want to get the h510 flow but I also want the Corsair Icue elite capellix 240mm cause I was gonna buy 2 aer rgb fans to put in the front of my case and take the fans from my aio to use at the top and back of the case I seen some guy in YouTube do it but I don’t know if it actually works or not and what size fans should I get if this does work to mount on my aio radiator below I’ll have the vid linked 

 

 

[Chiyawa]

Yes, I believe it should work.

 

Though I don't understand why you want to install NZXT fans on your Corsair radiator. Corsair radiator fans are much more powerful to push air through the radiator (having static pressure of 4.2mm H2O max). NZXT Aer only has 1.35mm H2O, which is very poor if use as radiator fan.

[Somerandomtechyboi]

50 minutes ago, Interect said:

So basically I building my pc soon I want to get the h510 flow but I also want the Corsair Icue elite capellix 240mm cause I was gonna buy 2 aer rgb fans to put in the front of my case and take the fans from my aio to use at the top and back of the case I seen some guy in YouTube do it but I don’t know if it actually works or not and what size fans should I get if this does work to mount on my aio radiator below I’ll have the vid linked 

 

 

Wdym by will it work or not? Compatibility? Airflow? Or something else?

 

Compatibility wise yea itll prob work

Airflow wise since you are using an h510 flow aka not a pc bake oven itll be fine for that too

 

Pricing wise the whole list is in shambles other than the board so there is a crap load of money you can save to upgrade to 12th gen and upgrade your gpu, and bang for buck does apply to aesthetics, if you can get the same or very similar aesthetic that you are aiming for with far cheaper/better perfoming parts (which you def can) then you have done aesthetics the right way

 

Btw any fan over 30$ is a joke, its either a really high performing fan (which doesnt matter that much) or ludicrously overpriced rgb fans

 

https://pcpartpicker.com/list/fn6KBj

Heres what id reccomend

 

Aesthetics wise should (hopefully) be similar to what you are aiming for

 

Upgraded to 12th gen

Upgraded ssd to 1tb

Cut cost by ~200$ to give the gpu more budget and/or for other upgrades

 

Btw h510 flow is on sale for 80$ at nzxt site

[Interect]

10 minutes ago, Somerandomtechyboi said:

Wdym by will it work or not? Compatibility? Airflow? Or something else?

 

Compatibility wise yea itll prob work

Airflow wise since you are using an h510 flow aka not a pc bake oven itll be fine for that too

 

Pricing wise the whole list is in shambles other than the board so there is a crap load of money you can save to upgrade to 12th gen and upgrade your gpu, and bang for buck does apply to aesthetics, if you can get the same or very similar aesthetic that you are aiming for with far cheaper/better perfoming parts (which you def can) then you have done aesthetics the right way

 

Btw any fan over 30$ is a joke, its either a really high performing fan (which doesnt matter that much) or ludicrously overpriced rgb fans

 

https://pcpartpicker.com/list/fn6KBj

Heres what id reccomend

 

Aesthetics wise should (hopefully) be similar to what you are aiming for

 

Upgraded to 12th gen

Upgraded ssd to 1tb

Cut cost by ~200$ to give the gpu more budget and/or for other upgrades

 

Btw h510 flow is on sale for 80$ at nzxt site

I was talking about compatibility 

[Somerandomtechyboi]

9 minutes ago, Interect said:

I was talking about compatibility 

In that case itll work fine but forgot to mention putting an airflow fan on a rad is a horrible idea cause its weak at pushing the air through the rad so going with an aio that already has ring rgb would be prefferable like the aquafusion aio that i reccomended or better ring rgb fans that do have decent static pressure like p120 bionix argb

[Interect]

Just might  get a x53 rgb  but I’ll try to cut down prices but my gpu is only 600 something and my parents are paying for it I’m paying for the rest