First time builder wanting help

[Natsulothbrok]

Budget (including currency): $3000AUD (don't mind spending a bit more)

 

Country: Australia

 

Games, programs or workloads that it will be used for: Want to stream on twitch while being able to be in call on discord and some of the games I will be playing is doom eternal, total war Warhammer 2 (want to try making some modes for it too), mass effect legendary edition and a lot of games like these.

 

Other details: This is my first PC build ever and I'd like to be able to play my games at 1440p on about medium or high and would like to run two monitors

To set the ground on my build, I'd like to use the Lian Li O11 XL cause it can fit the noctua NH-D15s (in black of course) as well as a RTX 3060, but those few things are the only parts I don't change my mind on every time i look at pc stuff but I still wonder if it's the best choices I can make.

Whenever I start looking at CPUs i mostly seem to default to the I7 10700k cause it is highly rated on pc part picker, I want to know if it worth going to an 11th gen I7 CPU (even though they pump out way more heat) or something else?

My second question is, in regards to the case, the main reasons i want it is the looks and the bottom fans to push more fresh air to the GPU. Is it worth it to have fans at the bottom pushing air in?, would it be better to go with something like the 5000D airflow or the 4000D airflow and save the $100+?

 

This is my full pc list but would still need to get monitors for it: https://au.pcpartpicker.com/list/DGYvVw

Thank you all in advance.

[MrBee420]

7 minutes ago, Natsulothbrok said:

Budget (including currency): $3000AUD (don't mind spending a bit more)

 

Country: Australia

 

Games, programs or workloads that it will be used for: Want to stream on twitch while being able to be in call on discord and some of the games I will be playing is doom eternal, total war Warhammer 2 (want to try making some modes for it too), mass effect legendary edition and a lot of games like these.

 

Other details: This is my first PC build ever and I'd like to be able to play my games at 1440p on about medium or high and would like to run two monitors

To set the ground on my build, I'd like to use the Lian Li O11 XL cause it can fit the noctua NH-D15s (in black of course) as well as a RTX 3060, but those few things are the only parts I don't change my mind on every time i look at pc stuff but I still wonder if it's the best choices I can make.

Whenever I start looking at CPUs i mostly seem to default to the I7 10700k cause it is highly rated on pc part picker, I want to know if it worth going to an 11th gen I7 CPU (even though they pump out way more heat) or something else?

My second question is, in regards to the case, the main reasons i want it is the looks and the bottom fans to push more fresh air to the GPU. Is it worth it to have fans at the bottom pushing air in?, would it be better to go with something like the 5000D airflow or the 4000D airflow and save the $100+?

 

This is my full pc list but would still need to get monitors for it: https://au.pcpartpicker.com/list/DGYvVw

Thank you all in advance.

I think you should fine a good airflow case cause of the hot gpu you have, It is better to get the Corsair 400D or the 5000D cause they are very good for airflow. I am only recommending with my experience with these cases.

[MrBee420]

11 minutes ago, Natsulothbrok said:

Budget (including currency): $3000AUD (don't mind spending a bit more)

 

Country: Australia

 

Games, programs or workloads that it will be used for: Want to stream on twitch while being able to be in call on discord and some of the games I will be playing is doom eternal, total war Warhammer 2 (want to try making some modes for it too), mass effect legendary edition and a lot of games like these.

 

Other details: This is my first PC build ever and I'd like to be able to play my games at 1440p on about medium or high and would like to run two monitors

To set the ground on my build, I'd like to use the Lian Li O11 XL cause it can fit the noctua NH-D15s (in black of course) as well as a RTX 3060, but those few things are the only parts I don't change my mind on every time i look at pc stuff but I still wonder if it's the best choices I can make.

Whenever I start looking at CPUs i mostly seem to default to the I7 10700k cause it is highly rated on pc part picker, I want to know if it worth going to an 11th gen I7 CPU (even though they pump out way more heat) or something else?

My second question is, in regards to the case, the main reasons i want it is the looks and the bottom fans to push more fresh air to the GPU. Is it worth it to have fans at the bottom pushing air in?, would it be better to go with something like the 5000D airflow or the 4000D airflow and save the $100+?

 

This is my full pc list but would still need to get monitors for it: https://au.pcpartpicker.com/list/DGYvVw

Thank you all in advance.

I would get i5 12600k if I were you cause it is a very capable cpu with very good performance and it is a 12 Gen processor. It is very good and I would recommend that cpu

[MrBee420]

https://au.pcpartpicker.com/list/ 

https://www.amazon.com/gp/product/B09FSTZM2G/?tag=xdadev04-20 This is for the mouting adapter for LGA 1700

[MrBee420]

This is way cheaper and the performance is better

[Middcore]

21 minutes ago, MrBee420 said:

I think you should fine a good airflow case cause of the hot gpu you have

 

It's a 3060. 

 

4 minutes ago, MrBee420 said:

https://au.pcpartpicker.com/list/ 

This isn't actually a link to a parts list.

 

 

[MrBee420]

https://au.pcpartpicker.com/list/YTc9W4

 

[MrBee420]

1 minute ago, MrBee420 said:

https://au.pcpartpicker.com/list/YTc9W4

 

Check this for me the before link worked