RTX 2060 Bad performance :c

[JarNickolson]

So I've noticed that my PC its runing kinda poorly in some games that is suppose to run smooth and silk. For example, I can't get gta v in high - low settings to run with 75 stable FPS (my screen is 75hz). RDR2 cannot get those 75 fps in most places with a high - med settings, and drops to 54 fps in some cases. And finally, minecraft !!! it can get more than 60 fps even on med settings, please help :c, my drivers are updated and idk what to do im kinda worried because is my first biuld. (sorry for the bad english).

 

Here is my SETUP: Mother Asrock A520M - HVS Ryzen 5 3600 RTX 2060 6GB 16GB RAM DDR4 (1 SLOT OF 2) 3200Mhz SSD 250 GB HDD 1TB (GAMES ARE INSTALLED ON THIS ONE) PSU 650 WTS Also here is the results on userbenchmark.com: https://www.userbenchmark.com/UserRun/48114861 Hope you can help me fellas :c

[LIGISTX]

35 minutes ago, JarNickolson said:

So I've noticed that my PC its runing kinda poorly in some games that is suppose to run smooth and silk. For example, I can't get gta v in high - low settings to run with 75 stable FPS (my screen is 75hz). RDR2 cannot get those 75 fps in most places with a high - med settings, and drops to 54 fps in some cases. And finally, minecraft !!! it can get more than 60 fps even on med settings, please help :c, my drivers are updated and idk what to do im kinda worried because is my first biuld. (sorry for the bad english).

 

Here is my SETUP: Mother Asrock A520M - HVS Ryzen 5 3600 RTX 2060 6GB 16GB RAM DDR4 (1 SLOT OF 2) 3200Mhz SSD 250 GB HDD 1TB (GAMES ARE INSTALLED ON THIS ONE) PSU 650 WTS Also here is the results on userbenchmark.com: https://www.userbenchmark.com/UserRun/48114861 Hope you can help me fellas :c

Is XMP or DOCP set in BIOS to get the RAM actually running at 3200? And having a single stick of RAM means your running in single channel mode, which can be a rather significant performance hit.

 

If you go into the task manager and look at the RAM section, it should say the speed the RAM is running at, what’s it say? This will tell us if it’s at least running at 3200MHz.

[JarNickolson]

15 minutes ago, LIGISTX said:

Is XMP or DOCP set in BIOS to get the RAM actually running at 3200? And having a single stick of RAM means your running in single channel mode, which can be a rather significant performance hit.

 

If you go into the task manager and look at the RAM section, it should say the speed the RAM is running at, what’s it say? This will tell us if it’s at least running at 3200MHz.

Hi, thx for reading, yes I check it out and its running at 3200mhz 

[LIGISTX]

1 hour ago, JarNickolson said:

Hi, thx for reading, yes I check it out and its running at 3200mhz 

Only running single channel RAM can have up to a 30% impact on performance pretty easily, so it may be worth while to try and get another stick of RAM. Video from Jay on the subject: