Jump to content

Please help my ram problem!!!

Bruh no way
 Share
Posted

I am having this very sad ram issue. Every time I overclock my ram It doesn't want to boot or load. It worked before... Here are the specs for my pc:
https://pcpartpicker.com/list/wTb73Z

My hyperx fury ram is a 16gb kit (2/8) and 2133Mhz. Its CL14 (Intel XMP) :
https://www.kingston.com/datasheets/HX421C14FB2K2_16.pdf

And my G.Skull Trident Z RGB ram is a 16gb kit also (2/8) and 3200Mhz. Its CL16 (Intel XMP):
https://www.gskill.com/product/165/166/1536654268/F4-3200C16D-16GTZR-Overview

Every time I go into bios I only get the Hyperx XMP Profile (because its a AMD motherboard it shows up as D.O.C.P). My motherboard just shows a orange light, I have no possible overclocking skills I just search google. In order for me to make it boot I just reset the cosmos. Because I don't have a cosmos jumper I just take out the battery and short the connections(Obviously I had to unplug my pc). 

Because of my prossesor I am limited to only 2933Mhz. I dont know the settings to overclock my ram.
 

 

 

Link to comment
https://linustechtips.com/topic/1345310-please-help-my-ram-problem/
Share on other sites
Link to post
Share on other sites
Posted

So what frequency are you trying to overclock it to? 3200MHz CL16 1.35V is only meant to run 2133MHz CL15 at 1.2V, CL14 might not work. 2133MHz CL14 1.2V is even less likely to do 3200MHz CL16 at 1.35V, not 2933MHz CL16 either.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
1 hour ago, Jurrunio said:

So what frequency are you trying to overclock it to? 3200MHz CL16 1.35V is only meant to run 2133MHz CL15 at 1.2V, CL14 might not work. 2133MHz CL14 1.2V is even less likely to do 3200MHz CL16 at 1.35V, not 2933MHz CL16 either.

 

huh... I am trying to over clock my ram to only 3000MHz at 1.4V I might change the timings to CL15 (but I don't know how).

Link to post
Share on other sites
Posted
29 minutes ago, Bruh no way said:

 

huh... I am trying to over clock my ram to only 3000MHz at 1.4V I might change the timings to CL15 (but I don't know how).

Memory is not CPU, more voltage or looser timings can't do much on memory that are just incapable. Lower timings is higher performance and stress to the memory so that's just making it worse.

 

Best way for you is to remove the 2133MHz kit and run 3200MHz on the Gskill kit. Need to clear CMOS after you change the memory.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×