Bluescreens

[Umuralp53]

Hello my system is:

- Ryzen 5 3600

-Asus Tuf B450m-pro

-4x8 Apacer Nox 3200 Mhz DDR4 memory

-Sapphire Rx 570 Nitro Plus 4 gig

-Apacer AS2280P4 512GB Nvme PCI-e m.2 sdd as boot drive

-Xigmatek Tauro M Plus 600w 80+ PSU

I built this pc few months ago as an upgrade to my old system in mind of a preparation step to buy a 3070 but you know it is going. Anyway at first everything was ok system was working just fine. Few weeks later i got some bluescreens (while booting) but not many once in a week maybe. So I reinstalled windows and it seemed working again until I got a bluescreen (while I'm using) but I don't remember the code. So I started to troubleshoot first I updated the bios and it was completely gone no boot no display nothing just the fans spining. So I sent the motherboard to warranty. While it was in warranty I used my old Mb with same ssd same cpu same PSU same GPU but with different rams(2 Stick). So they said there is nothing wrong with it.I did some troubleshooting again and it was not working with 4 stick but was working in 2 stick DIMM2 and DIMM4 but wasn't working in DIMM1 and DIMM3. So I resent the MB and tried with diffirent MB and it didn't work again. So I tought it might be the cpu. So I sent it too then mb arrived and then cpu got changed. I boot it up and it didn't work again. I read something about increasing DRAM voltage a little bit might solve the problem and it did. I was using it peacefully for few days but then I started to got some bluescreens again while booting. It didn't boot until I change anything in bios. So evertime I try to boot my computer it is giving me a bluescreen (Wide variety of them) and I go to bios increase the DRAM voltage by 0.05v and it boots. Next day a bluescreen again and I go to bios drop the DRAM voltage by 0.05v ant its boots. So what should I do? I'm sick of Warranty services it takes at least 2 weeks to send them back to my product. 

Note: I'm not having any artifacts while it is booted.

2 of the bluescreen code are:

0xc0000428 and ATTEMPTED_TO_READONLY_MEMORY

 

Thank you for your help.

[Radium_Angel]

(1)Test your RAM with MemTest86

(2) Find all your crash dump files and upload them here, I can sort though them and see what's going on

[Umuralp53]

Just now, Radium_Angel said:

(1)Test your RAM with MemTest86

(2) Find all your crash dump files and upload them here, I can sort though them and see what's going on

I did when they sent my mb back first time as two pairs in DIMM2 and DIMM4 with different configurations and there wasn't any error.