Jump to content

GPU power management rebuild

tomcer2003
 Share
Posted

Hi guys. I'm currently modding one of my old cards (r7 370X) and there is some weird power plain and power distribution. I don't want to overload my PCI power (I found moded bios where are all limits disabled) and when I measured PCI power it was pulling 110W. So I want to solder wire (+12V) from 8 pin to the PCI power. I don't think it should short anything, but to be sure I'm asking if it would be problem. Because I don't want to short my PSU rails. In the past I just cut the lines from pci power and soldered wire from 6 pin to pci on my 1650S. I don't want to do this here. So what's your opinion 

Link to comment
https://linustechtips.com/topic/1330747-gpu-power-management-rebuild/
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×