First time builder

[Informal]

Hello, I was wondering if somebody could help me.

 

I just built my first pc and want to add some RGB to my Phanteks Enthroo Pro M tempered glass edition fans.

 

The fans themselves do not have RGB, so I bought the Phanteks HALOS digital RGB Frame for my fans which goes ontop of the fans.

 

The problem I'm having is that my motherboard (ASUS PRIME Z590M-PLUS) has 4 pins sticking out on the rgb headers, while the fan frames can only take in 3 and stick out 3. So the frames can't hook up to my motherboard as far as I can figure out.

 

Is there an adapter I could get or do I need to get a different type of fan frame? Thank you

[s3riouscat]

Your motherboard does have 2x 3pin 5v Argb headers. Are you using them for something else? If you need more headers you can use something like this hub.

 

If you need the adapter from phantek it's this thing. https://phanteks.com/PH-CB_DRGB3P-MB.html

 

Connect the hub header into your mb and fan frames into the hub. Or with adapter just daisy chain it. Watch out for max voltage on each header though.

 

[Cracklekc]

you motherboard has headers in the bottom right of the board right next to the four pin Rgb Header and another at the top right next to the other 4 pin Rgb header as the person above me mentioned you can get a 3 pin hub his listed is a four pin.