HarryPotterMod

[MPC]

 

I am pleased to present the HarryPotterMod project that reflects the most important parts of this well-known saga all over the world. The exterior of the cabinet represents the station of King’s Cross, as well as the bottom with the reproduction of the same. There will also be many other details such as the talking hat and the gold bottle. The bulkhead of the closet’s cable compartment has been covered in genuine leather and features the Hogwarts emblem.

The custom loop involves the installation of two 240-seat radiators on the back of the motherboard tray and a dual loop system with the pumps on the sides of the motherboard. Everything will be symmetrical and in the foreground.

 

Immerse ourselves in this magical world !!!

 

Thanks to the sponsors :

 

[MPC]

The starting point of the project is the Inwin Alice cabinet with its products.

 

[MPC]

We present the motherboard that will have the strength to handle all kinds of magic and spell, the Asrock X299 Taichi CLX !

 

[MPC]

The source of all magic, the magical Intel i9-10980XE processor !

 

[MPC]

The memory of the old events inside the Hogwarts school is managed by Teamgroup !

 

[MPC]

To cool the hot magic spirits of the Hogwarts school we rely on Alphacool products !

 

[MPC]

The first step of the work concerns the external remaking of the cabinet to give the impression of a building so we use a particular type of cardboard, for modelling, in relief that simulates the bricks of a building. Obviously these pieces, to be precise and well set in the cabinet spaces, are laser cut.

 

[MPC]

The second processing concerns the realization of the rear panel for both a structural and aesthetic aspect. The aesthetic is given thanks to the coat of arms in resin of the school of Hogwarts in addition to the panel covering with the four main colors of the houses of Harry Potter.

 

[MPC]

Back panel covering with leather having the main colors of the four houses.

 

[MPC]

Plexiglass front that replicates the access to the station King’s cross with clock and arches engraved and then be illuminated by the LED strip with a milled seat.

 

[MPC]

This is the turn of the laser processing with regard to the internal arches of the King’s cross station that will have the task of supporting the canopy and finally the front to respect reality by giving depth to it.

 

[RollinLower]

I can;t say i'm a big fan of the looks, butthe work and craftmanship going into this so far is amazing! Nice work!

[MPC]

15 hours ago, RollinLower said:

I can;t say i'm a big fan of the looks, butthe work and craftmanship going into this so far is amazing! Nice work!

Thank you Rollin 

[MPC]

Gluing parts that make up the front and rail for the train to the school of Hogwarts.

 

[MPC]

It’s time to bend the plexiglass panel to give it the curved shape of the canopy. It is a complex process as being able to keep the whole piece at the right temperature and then bend it is difficult.

 

[MPC]

Overview of the new changes made.

 

[MPC]

Hardware assembly phase and start for custom loop.

 

[MPC]

Final pictures – Part 1

 

[MPC]

Final photos - Part 2

Many thanks to the project sponsors : InWin, ASRock, TeamGroup and Alphacool.