Help needed. RGB madness

[Acclanugget]

Can someone help me with this RGB madness.

 

I have a H500 ARGB Cooler Master Case that has these 200mm ARGB cooler master fans and 3 Lian Li Unifans and a Corsair AIO which has RGB for the block as well.

Motherboard is a B550F Asus Strix

 

How do you connect all of these when theres only 2 addressable headers and 2 non addressable headers?

 

Any help would be appreciated

[WhitetailAni]

There are splitters that you can buy, but know that this will make anything connected to them do exactly the same thing.

[Acclanugget]

36 minutes ago, ragnarok0273 said:

There are splitters that you can buy, but know that this will make anything connected to them do exactly the same thing.

1 argb splitter wont affect it?

1 argb header for the Lian Li and 1 ARGB header split for the corsair AIO and 2 Cooler Master Fans?

[Arrogath]

Use splitters for sure. From my count you should have 3 separate argb cable ends, so you only need one Y type splitter to add 2 of those to one header. Just put what lights you want to control as a group on a single header so if that means you need a 3 way splitter go that way instead. Personally wish the boards came with a couple, but no such luck 

[Acclanugget]

1 hour ago, Arrogath said:

Use splitters for sure. From my count you should have 3 separate argb cable ends, so you only need one Y type splitter to add 2 of those to one header. Just put what lights you want to control as a group on a single header so if that means you need a 3 way splitter go that way instead. Personally wish the boards came with a couple, but no such luck 

My concern is the clash between the brands

A single Y splitter for a corsair AIO and the Cooler Master fans

Both ARGB

Can I still control these separately by software? iCue and whatever cooler master has?

[thanhdang]

3 hours ago, Acclanugget said:

Can someone help me with this RGB madness.

 

I have a H500 ARGB Cooler Master Case that has these 200mm ARGB cooler master fans and 3 Lian Li Unifans and a Corsair AIO which has RGB for the block as well.

Motherboard is a B550F Asus Strix

 

How do you connect all of these when theres only 2 addressable headers and 2 non addressable headers?

 

Any help would be appreciated

I have this board. It has only 1 Addressable header and 2 4 pin RGB headers.

You can use a splitters or a hub.

[thrasher_565]

7 hours ago, Acclanugget said:

My concern is the clash between the brands

A single Y splitter for a corsair AIO and the Cooler Master fans

Both ARGB

Can I still control these separately by software? iCue and whatever cooler master has?

no

 

the stuff hooked to your mb will use the mb software.

if you want to use icue you need corsair usb controller

if you want to use coolermaster software you need coolermasters usb controller

[Acclanugget]

7 hours ago, thrasher_565 said:

no

 

the stuff hooked to your mb will use the mb software.

if you want to use icue you need corsair usb controller

if you want to use coolermaster software you need coolermasters usb controller

Oh okay cool! Nice

Thank you