No signal from GPU

[maxwz]

I installed a new RTX 3060 Ti by MSI Gaming X Trio in my system. When I turn it on, it gives no display signal, the monitor just stays black. Here is what I've tried:
 

• Monitor is 100% OK (tested with ps4)
• PSU is 100% OK (swapped 550 with new 750 watts) (RM750x)
• Drives are 100% OK (disconnected all SATA cables and used a bootable ISO of Windows)
• GPU is 100% itself (tried on friend's system, (shares the same MOBO and CPU)) (B450 + R5 2600)
• Tried using HDMI cables as the DP cable might be broken: still no signal from both.

I am planning to buy a new motherboard but what if it still doesn't work.
PS: Money is not in abundance.

[shoutingsteve]

try plugging your display into the onboard video out, thun go ointo the BIOS and look for something about the default display being from the onboard not the PCI slot.

 

Maybe?

[maxwz]

6 minutes ago, shoutingsteve said:

try plugging your display into the onboard video out, thun go ointo the BIOS and look for something about the default display being from the onboard not the PCI slot.

 

Maybe?

Cannot do. My CPU doesn't have integrated graphics.

[shoutingsteve]

Is this a new build or did you upgrade an existing GPU to the 3060?

[Bombastinator]

There’s one more component to motherboard: motherboard bios.  There’s also cpu.  Need full machine specs btw.  They’re useful for figuring this kind of stuff out. As example, if you’ve got a 5xxx or 3xxx ryzen chip bios becomes a big question.  Make and model of each component.

[maxwz]

Old system with:

R5 2600

RX 570 MSI Armor 8GB

RM750x

Tomahawk B450 (not max)

240GB + 1TB

3000 4x4 DDR4 by Corsair Vengeance

 

(Now upgraded to MSI Gaming X Trio 3060 Ti)

How do I reset my motherboard and/or BIOS without display?

 

 

[maxwz]

33 minutes ago, shoutingsteve said:

Is this a new build or did you upgrade an existing GPU to the 3060?

Old system. 

[Bombastinator]

28 minutes ago, maxwz said:

Old system with:

R5 2600

RX 570 MSI Armor 8GB

RM750x

Tomahawk B450 (not max)

240GB + 1TB

3000 4x4 DDR4 by Corsair Vengeance

 

(Now upgraded to MSI Gaming X Trio 3060 Ti)

How do I reset my motherboard and/or BIOS without display?

 

 

2600 should at least be in the bios.  Some motherboards have systems where bios can be upgraded without need of anything but a PSU.  

[maxwz]

7 minutes ago, Bombastinator said:

2600 should at least be in the bios.  Some motherboards have systems where bios can be upgraded without need of anything but a PSU.  

How do I do this? Also, I followed this tutorial on how to reset MOBO? I used a paperclip and 'shorted(?)' the 2 pins next to the battery. Did nothing I guess.

[Bombastinator]

5 minutes ago, maxwz said:

How do I do this? Also, I followed this tutorial on how to reset MOBO? I used a paperclip and 'shorted(?)' the 2 pins next to the battery. Did nothing I guess.

That reset the cmos.

[maxwz]

2 minutes ago, Bombastinator said:

That reset the cmos.

What could now be the solutution?

[Bombastinator]

45 minutes ago, maxwz said:

What could now be the solutution?

Cmos is overclocks and XMP and whatnot.  That’s “bog standard board no bios tweaks”

 

does the system work with the old 570?