Amd bios raid boot problem

[BlodyTiger]

Hi i recently bought another similar hard disk to do raid 0 on my pc. But when i went to power it up (after seting up the raid 0) , it loaded for a bit and then blue screened with the error inaccecible boot drive even though my boot drive is a ssd. It seems to be the problem the bios beacuse when i switch it back in achi mode it works perfectly fine but raid mode just gives an error.

 

I use a ryzen 3 2200g

Gigabyte a320m-h

Bios version.F1

Latest windows version

(Will provide more info if needed)

[Radium_Angel]

8 minutes ago, BlodyTiger said:

Hi i recently bought another similar hard disk to do raid 0 on my pc. But when i went to power it up (after seting up the raid 0) , it loaded for a bit and then blue screened with the error inaccecible boot drive even though my boot drive is a ssd. It seems to be the problem the bios beacuse when i switch it back in achi mode it works perfectly fine but raid mode just gives an error.

 

I use a ryzen 3 2200g

Gigabyte a320m-h

Bios version.F1

Latest windows version

(Will provide more info if needed)

That is correct, as Windows doesn't have the driver ready to see a RAID setup, so it will BSoD on you.

Boot into normal mode, install driver for RAID, then reboot, setup RAID in BIOS, and try

[BlodyTiger]

1 hour ago, Radium_Angel said:

That is correct, as Windows doesn't have the driver ready to see a RAID setup, so it will BSoD on you.

Boot into normal mode, install driver for RAID, then reboot, setup RAID in BIOS, and try

Thank you for you help but i tried evertyhing that i could and couldnt make it work for some reason

[Radium_Angel]

1 minute ago, BlodyTiger said:

Thank you for you help but i tried evertyhing that i could and couldnt make it work for some reason

Off topic: You said your main drive as an SSD, but you bought a similar HDD. I'm going to assume you're not trying to mix and match SSDs and HDDs in AID 0 are you?

And you did install the RAID driver while in AHCI mode, yes? Did the driver successfully install?

[BlodyTiger]

2 hours ago, Radium_Angel said:

Off topic: You said your main drive as an SSD, but you bought a similar HDD. I'm going to assume you're not trying to mix and match SSDs and HDDs in AID 0 are you?

And you did install the RAID driver while in AHCI mode, yes? Did the driver successfully install?

No , they are both toshiba 1tb drives. And i updated my processor drivers but i wasnt able to find any windows 10 specific raid drivers , nor did i find any motherboard raid drivers (i did download at least the latest). See amd's program wouldnt let me instal their raid drivers in achi mode , it had to be raid mode which i couldnt access

[BlodyTiger]

2 hours ago, Radium_Angel said:

Off topic: You said your main drive as an SSD, but you bought a similar HDD. I'm going to assume you're not trying to mix and match SSDs and HDDs in AID 0 are you?

And you did install the RAID driver while in AHCI mode, yes? Did the driver successfully install?

Also i dont know how viable this is but i just went and striped those two hdd in a single partition in windows drive manager(in achi)

[Radium_Angel]

52 minutes ago, BlodyTiger said:

See amd's program wouldnt let me instal their raid drivers in achi mode , it had to be raid mode which i couldnt access

The classic Catch-22

Only way around that is a fresh install then.