Jump to content

Hello i just switched from a 100/20 to 1000/300 FTTH ethernet plan, and due to some locaction problems i had to connect the modem to a switch and then i linked my pc to it. When i linked my brother laptop to the switch it reached like 850 mbps but with my desktop it can go only at 90 or something. I immediately thought my motherbaord was not good enough but i checked and my asus h81 gamer with Intel(R) Ethernet Connection (2) I218-V should be able to reach at least 1 gbps.  I tried to change some configuration in my ethernet adaptor options but when i set duplex speed to 1gbps full duplex it loses connection. Do you have some suggestions?

Thank you for your help.

immagine_2020-11-14_184639.png

Link to comment
https://linustechtips.com/topic/1269134-no-1gbps-ethernet/
Share on other sites

Link to post
Share on other sites

1 minute ago, Gianluca95 said:

yes but i could try using some other. it should be cat5e

Try Cat 6 or higher. Ive seen cat5e for whatever reason cause auto negotiations to set to 100 meg which is what it seems to be doing. Unless its a managed switch and you can set the speed/duplex on the port, you will need to upgrade your cable most likely to Cat 6 or greater. 

Community Standards

Please make sure to Quote me or @ me to see your reply!

Just because I am a Moderator does not mean I am always right. Please fact check me and verify my answer. 

 

"Beast Mode"

Ryzen 7 9800x3d | Arctic Liquid Freeze 3 Pro 360 | MSI X870 Tomahawk Wi-Fi | MSI RTX 5080 Gaming Trio OC | Gskill Flare X5 6000MT/s CL30

1tb WD Black SN850x NVMe | 4tb WD SN850x NVMe | Antec Flux Pro | Be Quiet Pure Power 13 M 1000w | OWC 10gb NIC

 

Dedicated Streaming Rig

 Ryzen 7 3700x | Asus B450-F Strix | 32gb Gskill Flare X 3200mhz | Corsair RM550x PSU | MSI Ventus 3060 12gb | 250gb 860 Evo m.2

Phanteks P300A |  Elgato HD60 Pro | Avermedia Live Gamer Duo | Avermedia 4k GC573 Capture Card

 

Link to comment
https://linustechtips.com/topic/1269134-no-1gbps-ethernet/#findComment-14211751
Share on other sites

Link to post
Share on other sites

7 minutes ago, Skiiwee29 said:

Try Cat 6 or higher. Ive seen cat5e for whatever reason cause auto negotiations to set to 100 meg which is what it seems to be doing. Unless its a managed switch and you can set the speed/duplex on the port, you will need to upgrade your cable most likely to Cat 6 or greater. 

ok seems i fixed the thing by swtiching cable. i tried another cat5e and it works! the really strange thing is that the cable that gives me 90 mbps still works for my brother xD.

Thank you all.

Link to comment
https://linustechtips.com/topic/1269134-no-1gbps-ethernet/#findComment-14211773
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×