Jump to content

3080 crashing

robski58
By robski58
in Graphics Cards
 Share
Posted

I have a msi 3080 ventus 3x 10g oc, this is paired with a ryzen 3600x, msi b550 mobo, xpg d60g 3200 16gb, 1tb of a60 m.2 ssd, and a 650 watt gold power supply. I stream with slobs and game on 1080 144hz. I had this same setup but with a 5700 xt prior and had no issues, but now that i upgraded to the 3080 my system is giving me a BSOD. Code kmode_exception_not_handled and lists the crash address as ntoskrnl.exe+3f45a0. Any assistance would be great. Already did the ram check, updated to current bios, and im running the most current 3080 driver... also im running nzxt cam for my z73 and dragon center for my case rgb, not sure if these conflict with each other in any way as they can both control gpu performance

E6837091-F566-40C4-B1AA-2818CB1AAA28.jpeg

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/
Share on other sites
Link to post
Share on other sites
Posted

Did you DDU the old radeon drivers out of the system prior to installing NVIDIA drivers?

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201146
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, robski58 said:

Yes i made sure to do that before installing the new card

What exact PSU - these 3080's, certain ones, were shipped out with shit power control modules (or some such) so when they reach full load they were crashing systems.

Workstation Laptop: Dell Precision 7540, Xeon E-2276M, 32gb DDR4, Quadro T2000 GPU, 4k display

Wifes Rig: ASRock B550m Riptide, Ryzen 5 5600X, Sapphire Nitro+ RX 6700 XT, 16gb (2x8) 3600mhz V-Color Skywalker RAM, ARESGAME AGS 850w PSU, 1tb WD Black SN750, 500gb Crucial m.2, DIYPC MA01-G case

My Rig: ASRock B450m Pro4, Ryzen 5 3600, ARESGAME River 5 CPU cooler, EVGA RTX 2060 KO, 16gb (2x8) 3600mhz TeamGroup T-Force RAM, ARESGAME AGV750w PSU, 1tb WD Black SN750 NVMe Win 10 boot drive, 3tb Hitachi 7200 RPM HDD, Fractal Design Focus G Mini custom painted.  

NVIDIA GeForce RTX 2060 video card benchmark result - AMD Ryzen 5 3600,ASRock B450M Pro4 (3dmark.com)

Daughter 1 Rig: ASrock B450 Pro4, Ryzen 7 1700 @ 4.2ghz all core 1.4vCore, AMD R9 Fury X w/ Swiftech KOMODO waterblock, Custom Loop 2x240mm + 1x120mm radiators in push/pull 16gb (2x8) Patriot Viper CL14 2666mhz RAM, Corsair HX850 PSU, 250gb Samsun 960 EVO NVMe Win 10 boot drive, 500gb Samsung 840 EVO SSD, 512GB TeamGroup MP30 M.2 SATA III SSD, SuperTalent 512gb SATA III SSD, CoolerMaster HAF XM Case. 

https://www.3dmark.com/3dm/37004594?

Daughter 2 Rig: ASUS B350-PRIME ATX, Ryzen 7 1700, Sapphire Nitro+ R9 Fury Tri-X, 16gb (2x8) 3200mhz V-Color Skywalker, ANTEC Earthwatts 750w PSU, MasterLiquid Lite 120 AIO cooler in Push/Pull config as rear exhaust, 250gb Samsung 850 Evo SSD, Patriot Burst 240gb SSD, Cougar MX330-X Case

 

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201180
Share on other sites
Link to post
Share on other sites
Posted

ps. dragon center sucks, get rid of that, and NZXT cam + other bloatware. they casue random issue with some people.

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201188
Share on other sites
Link to post
Share on other sites
Posted
Just now, robski58 said:

My mistake it was a 700w, “be quiet! Pure power 11”

should be fine with rtx 3080. Do you have two separate cables going in to the 2x8pin, or 1 cable with 2x8pin?

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201207
Share on other sites
Link to post
Share on other sites
Posted

from the psu to gpu i mean. it has 2x8 pin power. do you onlyu have one cable with 2x8pin going ot the gpu or 2x cables wiht 1x8pin connected to the gpu?

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201219
Share on other sites
Link to post
Share on other sites
Posted
Just now, robski58 said:

Im just using the 1 cable that came with the power supply that has 2x8 pins

that might be the problem. 1x cable can not probably handle over 300W.

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201221
Share on other sites
Link to post
Share on other sites
Posted

use both of the cables with 2x8pin connectors, but only connect 1x8pin form the both of them to the gpu.

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201226
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, SavageNeo said:

use both of the cables with 2x8pin connectors, but only connect 1x8pin form the both of them to the gpu.

Copy that. Ill try it out, i have to go buy another cable because the psu only came with that one cable. Ill update as soon as i test it out. Is there anything in the code that i posted that might tell you it was the psu?

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201240
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, robski58 said:

i have to go buy another cable because the psu only came with that one cable.

what? did you buy used? since the new one comes with 2x cables with 2x8pin on both of them.

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201251
Share on other sites
Link to post
Share on other sites
Posted

it should have all the cables for all the slots. contact newegg and see what they can do. you have to buy cable which fits in your psu (check be quiet's website)

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14201283
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 11/11/2020 at 8:10 AM, SavageNeo said:

it should have all the cables for all the slots. contact newegg and see what they can do. you have to buy cable which fits in your psu (check be quiet's website)

It had no effect adding the second cable. Still crashed. But i seen someone online had the same problem but got rid of dragon center and it worked fine. I uninstalled dragon center and it worked. Only thing is i have no way to control my rgb now because dragon center had mystic light

Link to comment
https://linustechtips.com/topic/1267891-3080-crashing/#findComment-14206197
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×