Yet another Ram booting problem

[MuskieSpook]

Evening gentlemen and ladies. 

I am building a system for a friend and have the board loaded with the cpu, noctua coolers, and 64gb of Teamgroup 3200mhz ram. The system will not post with more than one dimm installed of ram. we have tested all the ram sticks and they all work in slot A2. but if I add more than one, I get no post and no display out of the GPU. 

Any suggestions

 

MuskieSpook

[svmlegacy]

9 minutes ago, MuskieSpook said:

Evening gentlemen and ladies. 

I am building a system for a friend and have the board loaded with the cpu, noctua coolers, and 64gb of Teamgroup 3200mhz ram. The system will not post with more than one dimm installed of ram. we have tested all the ram sticks and they all work in slot A2. but if I add more than one, I get no post and no display out of the GPU. 

Any suggestions

 

MuskieSpook

Welcome to the forum.

 

Can we get more information on the system? Specs, and model numbers?

[aDoomGuy]

^That.

 

But you can try to clear CMOS on the board and see if the system manages to retrain the memory. Remember it may take some time to train it.

[MuskieSpook]

Asus x570 e gaming motherboard 

ryzen 7 3700X 

attempting to get to post 64gb of team group dimms 4x16

teamgroup 1tb nvme in slot 1

generic nvme 256gb in slot 2 

Zotac rtx super 2060 mini for video

noctua nh 12us cooler (Linus makes

putting this on look way easier in videos)

that’s all I have so far. 
 

if there is more than one dimm installed I get a solid ram error light and q code 02

tried all four dimms in slot one they all work as singles.

[thiagoss]

Is your Teamgroup 3200mhz on QVL list ? Assuming its a ROG Strix X570-E Gaming: (https://dlcdnets.asus.com/pub/ASUS/mb/SocketAM4/ROG_STRIX_X570-E_GAMING/AMD_Matisse_for_ROG_STRIX_X570-E_GAMING_DRAM_QVL_20190912.pdf)

 

Also, I checked for Team in the list. I could only find models that accept 2 DIMMs slots, not 4. So, if you manage to make it work with 2 slots it may not work with all 4 DIMMs.

 

Make sure you are using slots A2+B2 for dual-channel.

 

Are you using any DOCP profile?

 

Also, do you have the latest BIOS installed on the MB?

 

[MuskieSpook]

Latest bios installed.

No DOCP profile.

Tried the A2+B2  setup when trying everything

will only output display and post when a single stick is installed. .

 

[MuskieSpook]

bought some corsair vengeance low profile in 16GB sticks also at 3200 will try those today. 

If they work anyone want some team group ram?

[MuskieSpook]

Tried the Corsair ram. Same behavior. It’s probably the board. Maybe the cpu. Swapping both.