Graphics card pops up

[MiloszPL]

I have a corsair 300r housing. ASRock B460M-HDV does not fit as it has the micro ATX standard. The motherboard is bending. So I have to raise it with a knife so that it does not bend. As a result, the graphics card does not work without this upgrade. How to screw it on?

[MadAnt250]

5 minutes ago, MiloszPL said:

I have a corsair 300r housing. ASRock B460M-HDV does not fit as it has the micro ATX standard. The motherboard is bending. So I have to raise it with a knife so that it does not bend. As a result, the graphics card does not work without this upgrade. How to screw it on?

What graphics card to you have? And, can you provide a photo?

[MiloszPL]

4 minutes ago, MadAnt250 said:

Jaką masz kartę graficzną? Czy mogę dostarczyć zdjęcie?

gtx 980ti

[MadAnt250]

Just now, MiloszPL said:

gtx 980ti

Which model? There are many 980 ti's with different designs and coolers.

[MiloszPL]

White housing. He's a clerk. The point is, the case doesn't secure the plate and it bends. There is no room for one screw in the housing, because the hole is nearby. By tightening the plate, it also bends.

[Moonzy]

16 minutes ago, MiloszPL said:

The motherboard is bending.

does the case use standoffs?

are the standoffs in the right position for mATX motherboard?

i dont think i've seen any ATX cases that doesnt also support mATX boards.

[MadAnt250]

3 minutes ago, MiloszPL said:

gtx 980ti

Did you install the pci cover screws?

[Internet Person]

27 minutes ago, MiloszPL said:

I have a corsair 300r housing. ASRock B460M-HDV does not fit as it has the micro ATX standard. The motherboard is bending. So I have to raise it with a knife so that it does not bend. As a result, the graphics card does not work without this upgrade. How to screw it on?

Need more information and pictures.

[MadAnt250]

8 minutes ago, MiloszPL said:

White housing. He's a clerk. The point is, the case doesn't secure the plate and it bends. There is no room for one screw in the housing, because the hole is nearby. By tightening the plate, it also bends.

A photo would help with understand what is happening.

[Internet Person]

13 minutes ago, Internet Person said:

Need more information and pictures.

 

23 minutes ago, MiloszPL said:

White housing. He's a clerk. The point is, the case doesn't secure the plate and it bends. There is no room for one screw in the housing, because the hole is nearby. By tightening the plate, it also bends.

 

Napisz po Polsku. Zalacz jakies zdjecia.

[MiloszPL]

10 minutes ago, Internet Person said:

 

 

Napisz po Polsku bo nic nie rozumiem. Zalacz jakies zdjecia.

is

[MadAnt250]

20 minutes ago, MiloszPL said:

is

Check the latch/locking tab for the pcie slot.

[Internet Person]

22 minutes ago, MiloszPL said:

is

 

You don't have a better picture? This looks like a bad situation, I don't like that knife - you will break something. Don't power on the PC until you figure this out. Take everything out: the video card and the motherboard. Make sure that you have the correct number of standoffs that align with the holes in the motherboard.

 

Also, make sure the I/O shield is inserted in all the way in. You may need to push it really hard until all four sides snap into the case.

 

Is there anything else between the edges of the board and the case? Like a bent PCI slot cover, or something?

 

is the case bent?

 

There is something preventing the board from aligning with the standoffs.

[MiloszPL]

Unfortunately, there is nothing else. One screw entry is missing and the other is missing. The size of my thumb has become between the motherboard and the case.

[MadAnt250]

4 minutes ago, MadAnt250 said:

Check the latch/locking tab for the pcie slot.

 

Just now, MiloszPL said:

Unfortunately, there is nothing else. One screw entry is missing and the other is missing. The size of my thumb has become between the motherboard and the case.

 

[Internet Person]

2 minutes ago, MiloszPL said:

Unfortunately, there is nothing else. One screw entry is missing and the other is missing. The size of my thumb has become between the motherboard and the case.

There must be something there. You're missing the standoffs? Read my post above and remove everything and carefully analyze the situation.

[MiloszPL]

I checked many times. Without the knife, the pc won't start

[MiloszPL]

2 minutes ago, Internet Person said:

There must be something there. You're missing the standoffs? Read my post above and remove everything and carefully analyze the situation.

I do not have spacers, because they were used to mount the old msi z97 gaming 3 motherboard. They cannot be removed.

[Internet Person]

Just now, MiloszPL said:

I checked many times. Without the knife, the pc won't start.

Yes, but did you remove the board, as I suggested, and checked the standoffs and the I/O shield? You have to find what is pushing on the board. Take a break, get some sleep and try to do it over tomorrow. You may be missing something.  I've never seen a case or a mobo with misaligned holes. You're missing something.

[MiloszPL]

I checked for hours today. I was looking for. The computer was installed 5 years ago in the service. I don't know how many pins were in the set.

[Internet Person]

12 minutes ago, MiloszPL said:

I do not have spacers, because they were used to mount the old msi z97 gaming 3 motherboard. They cannot be removed.

Spacers? You mean the standoffs? This???

 

I just thought of something: I think we're getting somewhere: if the standoffs are missing then yeah, the board will bend down under the weight of the video card. Then the card may slide slightly out of the PCIe slot. That's why lifting it with a knife helps.

 

I gotta go now. Will check tomorrow.

[Internet Person]

Double post somehow, sorry, tired.

[MiloszPL]

[MiloszPL]

2 minutes ago, Internet Person said:

Jakoś podwójny post, przepraszam, zmęczony.

okay. I took a picture of what I have

[Internet Person]

Just now, MiloszPL said:

okay. I took a picture of what I have

Plyta sie wygina jak na nia naciszkasz, bo pod spodem brakuje wsparcia? Czy tak? Brakuje ci pewnie standoffs, czy jak je nazwales spacers.

Odpowiem jutro.