Jump to content

RAM issue

JoranC123
 Share
Posted

So hello guys!

Little question, ive got two kits of 2x8GB Corsair Vengeance Pro (CMW16GX4M2C32)

Now im overclocking them to 3200Mhz (their speed).
But my pc gets unstable etc (soc 1.1v , dram 1,4v)

Now my question is: is there a difference between a kit with 4 sticks or the two kits i just got?

Thanks in advance guys!

 

B550-F

Ryzen 5 3600

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

4 sticks is a little harder on the memory controller, but on a 3600 it shouldn't be a problem.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Grabhanem said:

4 sticks is a little harder on the memory controller, but on a 3600 it shouldn't be a problem.

I notice that , my pc gets unresponsive, any ideas why? When i turn off the overclock its fine

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

They are different, they are never tested with multiple kits together. Try dropping the frequency a bit

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
33 minutes ago, Jurrunio said:

They are different, they are never tested with multiple kits together. Try dropping the frequency a bit

So if i get a kit with 4 sticks , it would probably work?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
40 minutes ago, Jurrunio said:

They are different, they are never tested with multiple kits together. Try dropping the frequency a bit

And am i better off with 2X16GB or 4X8GB?

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
14 minutes ago, JoranC123 said:

So if i get a kit with 4 sticks , it would probably work?

yes

 

8 minutes ago, JoranC123 said:

And am i better off with 2X16GB or 4X8GB?

 

2x16 is better, the only advantage for 4x8 is that it looks better to some.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 hours ago, Jurrunio said:

yes

 

2x16 is better, the only advantage for 4x8 is that it looks better to some.

Soo my thoughts were wayy off , i reinstalled Windows and my problems were gone and my ram is Running @ 3200Mhz so thank you still!

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×