Please help

[Loch is]

I have built a pc and it does not work 

All it does is is boot cycle once or twice starts up but then doesn't display I've tried unpluginh the ram starting it then with the GPU switched hard drives with same os changed cpus changed motherboard and just doesn't work

 

 

 

[Slottr]

Specs?

[Loch is]

I5 3570k 

8gb 1866 fury X

1 tb hard Westgate 

Vs550 Corsair

Hd 7970

Not very sure on the mobo it's an overclockable z series one 

By gigabyte

 

 

[Slottr]

1 minute ago, Loch is said:

Not very sure on the mobo it's an overclockable z series one 

Please figure this out

[Loch is]

5 minutes ago, Slottr said:

Please figure this out

Found it

[Slottr]

Try taking the gpu out and running off the iGPU.

 

Make sure your ram is in a proper slot, probably A2. Make sure that the 24 pin motherboard power is connected right and the cpu power is connected right

[Loch is]

10 minutes ago, Slottr said:

Try taking the gpu out and running off the iGPU.

 

Make sure your ram is in a proper slot, probably A2. Make sure that the 24 pin motherboard power is connected right and the cpu power is connected right

Done that and still doesn't work it does what it always does boot cycles once then turns on for 18-20 seconds and I have changed the ram in all slots

[Fasauceome]

BIOS might not be up to date on that Z68. 60 series boards were for 2nd gen intel while 70 series boards were for 3rd gen. they are intercompatible, but only when updated.