Help me please...

[DerpAnthony]

Budget (including currency): around 550 Euro

Country: Belgium

Games, programs or workloads that it will be used for: Esports Titles such as Rainbow Six: Siege and bigger titles such as FarCry on lower settings

 

System: 

- CPU: Ryzen 3 3100

- GPU: Palit StormX OC GTX 1650 Super

- mbo: Gigabyte GA-A320M-S2H

- PSU EVGA 500W 80+ Bronze

- Case: ThermalTake Versa H18 ( acrylic )

- Mem: Corsair Vengeance LPX 16GB (2x8GB) DDR4 3000MHz

- Storage: Sandisk SSD 480 GB

 

-------Problem-------

 

So I bought all these components and started to build my first pc. I tested all my components before I put them in the case and all worked fine. I now have put everithing in and there is now no splash screen showing up and I can't get to the bios. I have checked my connections and I'm pretty sure I plugged in everything correctly. I have then searched for a sollution wich was to remove the mbo battery for a couple seconds and then put it back but it didn't work. I don't know what to do now and I would love if someone helped me out... I'm stressed out and tired and don't know what to do... Thank you already.

[DerpAnthony]

Yes, every fan is spinning, gpu, case, cpu...

[SpookyCitrus]

Welcome to the forums, I would remove everything from the case and bench test the system again, make sure you check where the standoffs are installed in the case as one simply being in the wrong spot under the motherboard could be connecting with something it shouldn't. 

[DerpAnthony]

SIgh, I'll go try that...

[DerpAnthony]

I have removed the components and put them how I originally tested them and still... a black screen no bios prompt.

[DerpAnthony]

I have now started the system with a ram stick in another slot every time with both of the ram sticks, but no results... And could you clarify what you mean by "Clear CMOS?". I have already removed the mbo battery a couple times if that is what you mean.

[DerpAnthony]

I have now tried to clear CMOS by holding a screwdriver against the two jumper pins, because I don't have the jumper to put on there, while starting up the system. It did nothing so I turned the system off and turned it on again without the screwdriver against the pins but it didn't do anything. Maybe I did it wrong, tell me if I did... And any other sollutions maybe???