Cpu package temp help

[Mofolodo]

Need help under standing this problem my package temps are showing 90C under load this is during a aida 64 stability test and between 50C and 70C when idling is this problem with a sensor and can i ignore this. Please any help is greatly apreciated.

[Mateyyy]

Fire up HWiNFO64 and/or Ryzen Master instead, rerun the stress test and then check the temperatures.

[Mofolodo]

thid is the result after test.

 

[Mateyyy]

9 hours ago, Mofolodo said:

thid is the result after test.

 

Have you tried increasing the fan/pump speeds at all?

If the 50-70C reading at idle is also accurate, I would check mounting pressure on the CPU block and maybe even remount it. 

Also, try checking in HWiNFO64 what your Vcore is at under load.

[Mofolodo]

hey just wanted to say i idle at 40-50C and under load its At 75-80C i reaseated the cooler but i think ill have to get a new one i got a 360mm cooler and it didnt fit well with my Gpu so the fans had to go on the other side of the rad and were a little to close to the front panel and not getting to much air ill try with a 240mm cooler and see if changing the position of the rad can help with the temps. or is there other ways to help with this i still have to stock cooler should i try that and see what temps i get?. and strangley my icue is showing the cpu at 35C under load.

 

Side note the temps dont match is there a problem somewhere.

 

 

[Mofolodo]

just reporting that i down clocked the cpu was running at high 1.3 low 1.4 down clocked too 1.1 now idle at 40C and on load At 60Cwill see how temps go over the next few weeks and take steps if it gets higher.