Jump to content

Solved: Stability Problems

turtles_vrywhr
 Share
Posted

Hi
yesterday i built a new system for my girlfriend.
Specs:
i5 9600K*
with Alpenfön Sella Cooler
ASUS ROG Z390-F*
Zotac 1060 6Gb
2x8 Gb HyperX Fury*
Seasonic PX 650 Plus Pt*
Samsung 970 EVO  - 1 TB
Sasmsung 850 - 500 GB
Seagate Baracuda 1 TB

Seagate 500 GB
in a Zalman S5 Case

*bought used

I did a new install of windows 10 onto the NVMe Drive and migrated some programs to it or reinstalled.
I didn't played a game or did more than some installations.

So today i wanted to test some stability and GPU was stable under Furmark.

When i tried to stress the CPU with Prime95 i got a bluescreen...
Because i read that Prime95 could be to hard, i tried the benchmark of the Intel Extreme Tunining Utility and same result -> Bluescreen...

I double Checked the CPU-Cooler and it looked like it is enough TIM and i also tightened the cooler evenly..

Do you guys have any ideas what i can try next?

BIOS is on the latest version and i didnt changed anything in it

Link to comment
https://linustechtips.com/topic/1214919-solved-stability-problems/
Share on other sites
Link to post
Share on other sites
Posted

What voltage do you have set ? 

What are your temps? 

Monitor this with hwinfo64 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to post
Share on other sites
Posted
3 minutes ago, turtles_vrywhr said:

-snip-

What are your temps when you stress test ?

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to post
Share on other sites
Posted
3 minutes ago, turtles_vrywhr said:

All Core +-50 °C

Run memtest86 and OCCT to make sure it's not a memory problem 

If it's not 

Clear the cmos and then try the stress test ( without xmp)

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to post
Share on other sites
Posted
  • Author
9 minutes ago, TofuHaroto said:

Run memtest86 and OCCT to make sure it's not a memory problem 

If it's not 

Clear the cmos and then try the stress test ( without xmp)

OCCT crashed after 1 min without finding an error https://cloud.tmaex.com/s/ZCrPZCsNbRFEsDX

Link to post
Share on other sites
Posted
Just now, turtles_vrywhr said:

OCCT crashed after 1 min without finding an error

What about memtest86 ?

 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to post
Share on other sites
Posted
1 minute ago, turtles_vrywhr said:

crashed after 3 minutes at this screen

-snip-

Clear the cmos

Disable xmp 

Inspect the board for any bent pins 

PC: Motherboard: ASUS B550M TUF-Plus, CPU: Ryzen 3 3100, CPU Cooler: Arctic Freezer 34, GPU: GIGABYTE WindForce GTX1650S, RAM: HyperX Fury RGB 2x8GB 3200 CL16, Case, CoolerMaster MB311L ARGB, Boot Drive: 250GB MX500, Game Drive: WD Blue 1TB 7200RPM HDD.

 

Peripherals: GK61 (Optical Gateron Red) with Mistel White/Orange keycaps, Logitech G102 (Purple), BitWit Ensemble Grey Deskpad. 

 

Audio: Logitech G432, Moondrop Starfield, Mic: Razer Siren Mini (White).

 

Phone: Pixel 3a (Purple-ish).

 

Build Log: 

Link to post
Share on other sites
Posted

Appears to be RAM related BSoD / errors.

AMD Ryzen 9000 Rig

  • AMD R7 9800X3D + Alphacool CORE 1 w/ Performance Mount Kit + Thermal Grizzly AM5 Contact Frame
  • Gigabyte X870E Aorus Pro Ice
  • 32GB (16GB X2) G.Skill Trident Z5 Neo RGB DDR5-6400
  • Sapphire NITRO+ 6800 XT Special Edition + EKwb Full Cover Block
  • Custom Loop w/ 2x 360mm Radiators
  • WD SN850X + WD SN750 + Samsung 980
  • EVGA P2 850W + Red/White CableMod Cables
  • Lian-Li O11 Dynamic EVO XL

AMD Ryzen 5000 Rig

  • AMD R7-5800X
  • Gigabyte B550 Aorus Pro AC
  • 32GB (16GB X 2) Crucial Ballistix RGB DDR4-3600
  • Gigabyte Vision RTX 3060 Ti OC
  • EKwb D-RGB 360mm AIO
  • Intel 660p NVMe 1TB + Crucial MX500 1TB + WD Black 1TB HDD
  • EVGA P2 850W + White CableMod cables
  • Lian-Li LanCool II Mesh - White

Intel i7-8086K / Z390 Rig (Decommissioned Q2' 2025)

Intel i7-6800K / X99 Rig (Officially Decommissioned, Dead CPU returned to Intel)
Intel i5-4690K / Z97 Rig (Decommissioned)

AMD FX-8350 / 990FX Rig (Decommissioned)

AMD Phenom II X6 1090T / 890FX Rig (Decommissioned)

 

<> Electrical Engineer , B.Eng <>

<> Electronics & Computer Engineering Technologist (Diploma + Advanced Diploma) <>

<> Electronics Engineering Technician for the Canadian Department of National Defence <>

Link to post
Share on other sites
Posted
  • Author

i will do this after my online lectures. @TofuHaroto Pins were fine. I had the seller send me a picutes befor i bought the board and inspected it right, when i got it.
I will clear the cmos then and i think XMP isn't even enabled but i'll double check that.

And then i will probably get 2 sticks out of my rig and try it with those.
 

4 minutes ago, -rascal- said:

Appears to be RAM related BSoD / errors.

Any suggestions i can try to solve those errors?
 

Link to post
Share on other sites
Posted
7 minutes ago, turtles_vrywhr said:

i will do this after my online lectures. @TofuHaroto Pins were fine. I had the seller send me a picutes befor i bought the board and inspected it right, when i got it.
I will clear the cmos then and i think XMP isn't even enabled but i'll double check that.

And then i will probably get 2 sticks out of my rig and try it with those.
 

Any suggestions i can try to solve those errors?
 

Slowly raise the RAM speed until you either hit the advertised speeds of the RAM kit or you fail to boot, then you raise the voltage (up by 0.025 volts at a time) until you boot and stress test. 

Link to post
Share on other sites
Posted
1 hour ago, turtles_vrywhr said:

It actually seems like the ram isnt supported by the motherboard. Its HX432C16FB3K2/16 and this particular Kit isnt mentioned in the Memory-Support list by Asus.

There is a 99% chance that it works fine, the only reason is that Asus can't test every single RAM kit in the world.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×