Loop order (reservoir)

[Gauzl]

I have my Monsoon D5 dual bay reservoir, in the picture below is the back view of it, as you can see it has 4 ports, the 2 on the left are inlets and the 2 on the right are outlets, I have never used a 5.25" reservoir before and am not sure of which ports to use for best water flow.

I have a 240mm radiator at the front of the case and will need to connect the radiator with the reservoir, would it be best to have it connected to the outlet or inlet? 

[Tea1337]

It looks like you can use that for 2 separate loops, so just use the top ones for a single loop system, as for the front rad, you should put that at the start of the loop, connect it to the outlet would be your best bet.

[Adnanklink]

Order really does not matter as long as the res is before the pump (which it is). Just set it up to look good

[Ghost]

Use the bottom intake port, I am currently using the top ports and intend to change over as having water enter at the top of the reservoir means you have to fill the reservoir up very high to avoid the sound of flowing water. The OUT port doesn't really matter. Pick whichever one is more convenient.

[Gauzl]

Use the bottom intake port, I am currently using the top ports and intend to change over as having water enter at the top of the reservoir means you have to fill the reservoir up very high to avoid the sound of flowing water. The OUT port doesn't really matter. Pick whichever one is more convenient.

I will do that.