Jump to content

Nice Clean build...

Ok, Can you provide some specifics?

CPU/GPU/PSU, we can see the MB is X570

RAM?, HD?

If the CPU is not with APU, then the onboard will not work.

Also, can you even get to the BIOS?

Another thing, I think you have the GPU in the wrong slot, it should be in PCIe Slot #1, the one close to the CPU.

Link to comment
https://linustechtips.com/topic/1206671-no-video/#findComment-13697565
Share on other sites

Link to post
Share on other sites

1 minute ago, The_Geek said:

Nice Clean build...

Ok, Can you provide some specifics?

CPU/GPU/PSU, we can see the MB is X570

RAM?, HD?

If the CPU is not with APU, then the onboard will not work.

Also, can you even get to the BIOS?

Another thing, I think you have the GPU in the wrong slot, it should be in PCIe Slot #1, the one close to the CPU.

Someone else mentioned the slot I chose on another thread I had with a different question....

 

Ryzen 5 3600

TUF X570 plus

Sapphire Nitro+ XR 5700 XT

RAM - 3200MHz

120 GB SSD (I seen its easier to install the OS that way then add my second SSD)

1TB VNMe 2.0 @ 3400 seq. read

 

and no I can not get a display to view the bios

Link to comment
https://linustechtips.com/topic/1206671-no-video/#findComment-13697579
Share on other sites

Link to post
Share on other sites

10 minutes ago, The_Geek said:

I dont see the NVMe drive, I think you have to be careful of that as it shares resources with the PCIe slot... so if you have both the GPU and the NVMe sharing the same PCIe resource, you may have these issues..

The slot is behind where the GPU is right now. I do not have installed yet - I want to the OS to go on the 120GB SSD - this is my 1st build and I'm not that savvy with all this yet and I found this is the easy/dumb way to get the OS to go on the SDD I want.

Link to comment
https://linustechtips.com/topic/1206671-no-video/#findComment-13697643
Share on other sites

Link to post
Share on other sites

2 minutes ago, The_Geek said:

Did you install the GPU in the First Slot?

 

no, I assumed where it is now is where it was meant to be placed, when I get home I'll try switching around and see what happens. The thing is the RGB does not turn on, I double checked the PSU connections, which leads me to believe it was DOA.

Link to comment
https://linustechtips.com/topic/1206671-no-video/#findComment-13697663
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×