Jump to content

i7-2600k overclocking help

first off i know its a 10 year old cpu but its still a gem to me. im rocking it on asus sabertooth z77 board and use there optimize clock. which gives me 4.39 ghz and max temp is 73c and thats at 100 percent usage. so i was wondering if anyone could give me some tips or a guide on overclocking it higher. i know next to nothing about overclocking but i can feel like i can get some more power out of it

 

Link to comment
Share on other sites

Link to post
Share on other sites

Max 1.42V if you can keep it cool (around 70C say). Not much else to talk about really

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

This is still one of the best overclocking guides ever made, IMO. Recommended settings / breakdown / specifics, begin in the second post:

 

https://www.overclock.net/forum/5-intel-cpus/1198504-complete-overclocking-guide-sandy-bridge-ivy-bridge-asrock-edition.html

 

As long as you haven't had any severe CPU degradation, typically 1.3-1.35v (VCORE) is generally good enough for a 4.5-4.6GHz overclock (on average). Then, after looking through the above guide, you will see other settings to be able to use (to fine tune the overclock much further, beyond only the VCORE). 

 

Hope this helps!

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×