Jump to content

Hi there!

 

Out of curiosity, I opened up CPU-Z earlier today, and noticed that my ram frequency was only at 1600mhz:

image.png.e6993f01ac4f418a6ca7ecd2f0ccec13.png

 

However-  I know for a fact that in my bios I set the ram to 3200mhz.

Also the latency doesn't make sense, where it should have been CL16 ( 16-18-18-36). 

 

Memory:

Corsair Vengeance LPX 16GB (2x8GB) DDR4 DRAM 3200MHz C16 Desktop Memory Kit – White (CMK16GX4M2B3200C16W)

 

Rest of system specs:

Asus ROG Strix X570-E gaming

AMD Ryzen 5 3600

GeForce RTX 2070 Super

 

So - is CPU-Z wrong? When I open Ram Cache, I do see it does recognize it can run at a max of 3200mhz:

image.png.076c9d18e39636935f9be7eedd0dee83.png

 

Or is something else going on?

 

I appreciate your input! :)

 

Robbert

Link to comment
https://linustechtips.com/topic/1205233-ram-frequency/
Share on other sites

Link to post
Share on other sites

DDR means the data rate is doubled over actual operating frequency, so you are running 3200.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1205233-ram-frequency/#findComment-13684172
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×