My Build

Tarbot · May 31, 2020

My progress today, all in and wired. Just have the res, tubing runs, and back cable management to complete for tomorrow. Sorry for the bad pics. Will take better ones when complete.

kkpatel87 · May 31, 2020

1 hour ago, Tarbot said:

-snip-

Not bad...IMHO, the wiring looks like it could use some work.

I would suggest routing the video card cables behind the mobo tray and come out of the lower back motherboard cutout and route along the back of the graphics card.

The front panel/usb connections look like they were just plugged in and thrown behind the motherboard without going into a specific route. Correct me if i didnt understand what you were trying to accomplish.

Tarbot · May 31, 2020

16 minutes ago, kkpatel87 said:

Not bad...IMHO, the wiring looks like it could use some work.

I would suggest routing the video card cables behind the mobo tray and come out of the lower back motherboard cutout and route along the back of the graphics card.

The front panel/usb connections look like they were just plugged in and thrown behind the motherboard without going into a specific route. Correct me if i didnt understand what you were trying to accomplish.

Hey KK thanks for the input... The vid card power cables are very stiff and a little on the short side so this was my only option right now. Maybe some Cable Modz in the future. The front panel connectors are run through a cutout to the back cable management area. First on the left is the audio, the two middle are fan headers (Have a small fan hub in back for the trips on the rad) the next is actually the USB connection for the CPU block. The Power / LED are run through a cutout to the cable management area in back. The front USB connections are middle of the board on the right side run through the cable management area in back.