Jump to content
Search In
  • More options...
Find results that contain...
Find results in...

RAM Issue

I have 32 Gigs of 3000 MHz Corsair Vengeance LPX and it is working at 32 Gigs. But for some reason it will only run at 1067 MHz and I want the 3000 MHz I paid for. Any tips??

p.s. I have already tried XMP settings and have done "auto" and manually put in the MHz and it hasnt worked.

Capture.PNG

Link to comment
Share on other sites

Link to post
Share on other sites

Clear CMOS and try again, sometimes settings get stuck and wont apply

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

10 minutes ago, nathan_rego said:

What is CMOS?

A thing that keeps your BIOS settings. You can look up the motherboard's user manual

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: 1TB HP EX920 PCIe x4 M.2 SSD + 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172), 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
Share on other sites

Link to post
Share on other sites

16 minutes ago, nathan_rego said:

have 32 Gigs of 3000 MHz Corsair Vengeance LPX and it is working at 32 Gigs. But for some reason it will only run at 1067 MHz and I want the 3000 MHz I paid for. Any tips??

p.s. I have already tried XMP settings and have don

Try enabling XMP or DOCP in the bios and. And to clear cmos you unplug the system hold down the power button form5 seconds then take out the cmos battery then put it back in after 10 second and power on the system

Quote me to see a reply!

Im not always right so please do some extra research 

The Ryzen Red One              Custom built by me 

Cpu:Ryzen 5 2600....Motherboard:Gigabyte B450 gaming x.....Ram:crucial ballistix sport LT @ 3200mhz......Gpu:RX 570 OC to 1300mhz......Storage:120GB ssd and 1TBHDD.......Case:Coarsair carbide Spec-04......Psu:EVGA W1 500W 80+ ......Fans:120mm Uphere RGB......Monitor: asus VP28U 4K 60hz 28"

 I have a red and black theme with the fans and some red accents I added with red tape

i like old Japanese cars and computers

 

Other devices: iPad Air 2 2017........PS4 slim.......2 Dell Optiplex 7010 1 MT other one SFF

 

Link to comment
Share on other sites

Link to post
Share on other sites

These are the settings I have on. I also did what you said by unplugging, taking out the battery, etc.

IMG_20200520_131606.jpg

IMG_20200520_131558.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, ISHAJDM said:

power

And it still says 1067 MHz in windows

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×