Completed first build but having some issues

[Slinckkey]

So i finished my first build with:

3700X

2070 Super

B450 Tomahawk Max

16GB 3600 DDR4

Cooler Master Masterliquid 240

Seasonic Focus+ 750W Modular PSU

 

The issue is I randomly get reboots when I'm not under any CPU or GPU load. I have not OCd anything other than getting my RAM to the 3600. Installed all drivers, updated BIOS. The screen just goes dark with no information shown, I only get a CPU debug LED, then upon booting I get a VGA then Boot debug LED.

[Guest]

1 hour ago, Slinckkey said:

So i finished my first build with:

3700X

2070 Super

B450 Tomahawk Max

16GB 3600 DDR4

Cooler Master Masterliquid 240

Seasonic Focus+ 750W Modular PSU

 

The issue is I randomly get reboots when I'm not under any CPU or GPU load. I have not OCd anything other than getting my RAM to the 3600. Installed all drivers, updated BIOS. The screen just goes dark with no information shown, I only get a CPU debug LED, then upon booting I get a VGA then Boot debug LED.

Perhaps lower the memory frequency to 3200mt/s and see if that helps stabilize the system.

[Slinckkey]

On 5/10/2020 at 10:22 AM, ShrimpBrime said:

Perhaps lower the memory frequency to 3200mt/s and see if that helps stabilize the system.

That did it. Don't really know why i didn't think of that.

Thanks for the help

[Motespls]

Just Curious, i have an identical build. I just finished my build and i have not been able to boot at all. Everything turns on but i get a boot debug Led and no video out. Im currently running 32 gigs of 3600 G Skill. Does the board need an update in order to support 3600 Ram?

Thanks!

/

[0x1e]

39 minutes ago, Motespls said:

Just Curious, i have an identical build. I just finished my build and i have not been able to boot at all. Everything turns on but i get a boot debug Led and no video out. Im currently running 32 gigs of 3600 G Skill. Does the board need an update in order to support 3600 Ram?

Thanks!

/

If it has never booted before then the RAM would be at 2133Mhz until you set it to 3600Mhz.
Try only one stick of ram/

[Motespls]

2 minutes ago, 0x1e said:

If it has never booted before then the RAM would be at 2133Mhz until you set it to 3600Mhz.
Try only one stick of ram/

Im guessing the ram is the issue i tried booting with single stick same result. tomorrow im going to go to my local pc parts store and see if i can try  2133 Mhz to get it into bios. Once i do this i can change the settings there correct and then continue with the 3600 Mhz?