No Signal

[parker13]

So recently I did some benchmarking for a different system. I only have one case right now so I took out the graphics card and all other parts to put the new motherboard in. When I finished my benchmarks, I put the other system back together. When booting, I saw that there wasn't any signal coming out of the graphics card. I tried different cords but no luck. The green LED turns on but still no signal. I've taken it out and put it back in but still nothing. Not sure what to do from here. Any suggestions? (Note that the graphics card was working perfectly before I started taking out the parts)

[3rrant]

3 minutes ago, eli13 said:

So recently I did some benchmarking for a different system. I only have one case right now so I took out the graphics card and all other parts to put the new motherboard in. When I finished my benchmarks, I put the other system back together. When booting, I saw that there wasn't any signal coming out of the graphics card. I tried different cords but no luck. The green LED turns on but still no signal. I've taken it out and put it back in but still nothing. Not sure what to do from here. Any suggestions? (Note that the graphics card was working perfectly before I started taking out the parts)

Clear CMOS, unplug the card and re-seat it (different PCI-E slot if possible), do the same with RAM and if possible use only one stick. Unplug and plug again the cable cords.

[parker13]

2 minutes ago, 3rrant said:

Clear CMOS, unplug the card and re-seat it (different PCI-E slot if possible), do the same with RAM and if possible use only one stick. Unplug and plug again the cable cords.

Thanks, I'll go try all of those.

[parker13]

30 minutes ago, eli13 said:

Thanks, I'll go try all of those.

I just realized that there's an orange light on above the RAM. Not sure what that means. I've tried using one stick, different sticks, different slots. What does this mean and what should I do?