Squid Proxy Setup Help

[Poet129]

I have setup Squid to cache all traffic but it isn't caching anything...  I ran "squid -z" in terminal. Here is my config.

Spoiler

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed

acl localnet src 10.0.0.0/8    # RFC1918 possible internal network
acl localnet src 172.16.0.0/12    # RFC1918 possible internal network
acl localnet src 192.168.0.0/16    # RFC1918 possible internal network
acl localnet src fc00::/7       # RFC 4193 local private network range
acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80        # http
acl Safe_ports port 21        # ftp
acl Safe_ports port 443        # https
acl Safe_ports port 70        # gopher
acl Safe_ports port 210        # wais
acl Safe_ports port 1025-65535    # unregistered ports
acl Safe_ports port 280        # http-mgmt
acl Safe_ports port 488        # gss-http
acl Safe_ports port 591        # filemaker
acl Safe_ports port 777        # multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access allow manager

# Deny requests to certain unsafe ports
http_access allow !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access allow CONNECT !SSL_ports

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access allow all

# Squid normally listens to port 3128
http_port 3128

# Uncomment the line below to enable disk caching - path format is /cygdrive/<full path to cache folder>, i.e.
cache_dir aufs /cygdrive/c/Squid/var/cache 1000000 16 256
cache allow all

# Leave coredumps in the first cache dir
coredump_dir /var/cache/squid

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:        1440    20%    10080
refresh_pattern ^gopher:    1440    0%    1440
refresh_pattern -i (/cgi-bin/|\?) 0    0%    0
refresh_pattern .        0    20%    4320

dns_nameservers 1.1.1.1 1.0.0.1

max_filedescriptors 3200
never_direct allow all
always_direct deny all

 

[Poet129]

How do I setup a Squid HTTPS Cache I've tried it myself unsuccessfully a while ago. Thanks in advance...

[Jarsky]

https://dev.to/suntong/using-squid-to-proxy-ssl-sites-nj3

[Poet129]

42 minutes ago, Jarsky said:

https://dev.to/suntong/using-squid-to-proxy-ssl-sites-nj3

I just now tried it most commands didn't work... I'm running Ubuntu x64 Server 18.04.4.

[Jarsky]

Theyre predominantly all generic linux commands. If you arent proficient in compiling and configuring in Linux, then consider a docker like https://github.com/salrashid123/squid_proxy