Jump to content

Ryzen 5 3600 acting odd.

VerTTi
 Share
Posted

Ive been at this for 4 days now and made several posts about it and i get mixed responses and just get confused... so here is footage of my system idling and running cinebench 20 just tell me is this normal behaiviour for my processor? when its idling and on high load it comes dangerously close to 1,5 and that according to some people could kill the cpu. 

Its never really goes below 1,2 and when its get close it bumps back up. I just got this new system costed 8 months of money saving by now im starting to regret getting ryzen because they obviously have issues.

Link for the video https://streamable.com/l3fr94

Link to comment
https://linustechtips.com/topic/1174160-ryzen-5-3600-acting-odd/
Share on other sites
Link to post
Share on other sites
Posted

thar's normal, when low number of cores are stressed it could shoot up as high as 1.47V but in all core workloads (e.g. Cinebench R20 multithread test) it wont really go past 1.3V

 

and you're reading the wrong number, CPU core voltage SVI2 is the correct one in HWinfo64. VID is the voltage the CPU wants, not that the board pushes into the CPU.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
15 minutes ago, Jurrunio said:

thar's normal, when low number of cores are stressed it could shoot up as high as 1.47V but in all core workloads (e.g. Cinebench R20 multithread test) it wont really go past 1.3V

 

and you're reading the wrong number, CPU core voltage SVI2 is the correct one in HWinfo64. VID is the voltage the CPU wants, not that the board pushes into the CPU.

Just seems insane to me how can i be sure it doesnt go past 1,500 someday and kill the cpu like many have suggested it will do in these forums on my previous posts?

Link to post
Share on other sites
Posted
52 minutes ago, VerTTi said:

Just seems insane to me how can i be sure it doesnt go past 1,500 someday and kill the cpu like many have suggested it will do in these forums on my previous posts?

Or you could trust the boost algorithm programmed by AMD that it wont do anything unsafe.

 

32 minutes ago, VerTTi said:

I just found this and this is just getting even more confusing by the moment 

At least the "if you dont know it, don't touch it" part is clear

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
8 minutes ago, Jurrunio said:

Or you could trust the boost algorithm programmed by AMD that it wont do anything unsafe.

 

At least the "if you dont know it, don't touch it" part is clear

Yeah but thing is i didnt do anything the voltage and temp values are out of the box values and im looking to use this cpu for years not like 4 months where it degrades it like 50mhz every 2-4 months?

 

Link to post
Share on other sites
Posted
1 hour ago, VerTTi said:

Yeah but thing is i didnt do anything the voltage and temp values are out of the box values and im looking to use this cpu for years not like 4 months where it degrades it like 50mhz every 2-4 months?

As I said, "safe voltage" greatly depends on current draw and current draw is heavily based on what it's doing. High idle voltage is fine, as long as stress test voltage is low

 

yes I think you're paranoid

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
1 minute ago, Jurrunio said:

As I said, "safe voltage" greatly depends on current draw and current draw is heavily based on what it's doing. High idle voltage is fine, as long as stress test voltage is low

 

yes I think you're paranoid

Stress voltage is 1,300+ and i suppose i am cuz this kind of a pc isnt something i can pull out of my @ss

Link to post
Share on other sites
Posted
3 minutes ago, VerTTi said:

Stress voltage is 1,300+ and i suppose i am cuz this kind of a pc isnt something i can pull out of my @ss

VID or CPU voltage SVI2?

 

Make sure the board's BIOS and chipset driver are up to date, if you dont want to miss anything new AMD pushes out (though that alone can be a source of instability)

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to post
Share on other sites
Posted
  • Author
1 minute ago, Jurrunio said:

VID or CPU voltage SVI2?

 

Make sure the board's BIOS and chipset driver are up to date, if you dont want to miss anything new AMD pushes out (though that alone can be a source of instability)

SVI2, chipsets have been updated, and i dont want to risk an bios update till i get an ups in few days.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×