No Display after upgrading CPU

[LaytonR6]

I just attempted to upgrade my cpu from a i5 8400 to a i7 9700k, I checked on the website and found that my Gigabyte Z370 HD3P is compatible with the new cpu and updated the bios software to be compatible, after fully installing everything and powering the pc on I get no display on my monitor and after around 20-25 seconds the pc turns off and back on and repeats the process, after further inspection I noticed that some of the pins on the motherboard cpu slot may be bent or broken however it was like this when I took the old cpu out, I retried my old cpu and i'm still getting the same issue.

[Jurrunio]

12 minutes ago, LaytonR6 said:

however it was like this when I took the old cpu out,

then you broke it when you're taking the CPU out. Otherwise it should have worked when you put the old CPU back

[Snowarch]

what os?

 

- if ubuntu 

it is normal. the trick is, install the os. update software center, add nvidia ppa. then shutdown the pc put in the gpu and then swap driver to nvidia if it doesnt read keyboard then omboard is your friend.

 

 

 - if its windows

3 things to concider. 

 

do you get a post? 

  -if you do

1. go into bios and set it to integrated graphics.

 

 -if not

1. turn the pc off and push all cables one loose one sometimes makes me not get a post. try again and make sure the hdmi cable is in well/not bent. 

1.5 confirm your cable (hdmi/dvi) is in the gpu socket and or graphics card sockets.

2. check debug leds if present.

3. the bent pens killed your board.

 

 

 

 

 

 

 

 

[Snowarch]

but really, post or no?

[LaytonR6]

8 minutes ago, Snowarch said:

what os?

 

- if ubuntu 

it is normal. the trick is, install the os. update software center, add nvidia ppa. then shutdown the pc put in the gpu and then swap driver to nvidia if it doesnt read keyboard then omboard is your friend.

 

 

 - if its windows

3 things to concider. 

 

do you get a post? 

  -if you do

1. go into bios and set it to integrated graphics.

 

 -if not

1. turn the pc off and push all cables one loose one sometimes makes me not get a post. try again and make sure the hdmi cable is in well/not bent. 

1.5 confirm your cable (hdmi/dvi) is in the gpu socket and or graphics card sockets.

2. check debug leds if present.

3. the bent pens killed your board.

 

 

 

 

 

 

 

 

windows, I dont get any display so I cant do the BIOS thing, everything lights up and seems to power completely fine, I will check again about the cables later but pretty sure its not that.

[LaytonR6]

17 minutes ago, Jurrunio said:

then you broke it when you're taking the CPU out. Otherwise it should have worked when you put the old CPU back

alright thats what I thought; thanks for the help