Jump to content

Hey nerds,

 

So, I just "finished" my first PC build. I've linked all the parts I used below. 

 

I turned on my power supply and pressed the power button on my PC and all the fans worked, the RGB came on, all was well with the world, and then it just shut off. Didn't even make it to post. 

 

When I try to turn it back on, the top EZ Dedug LED flashes on (red) , followed by the flash of the other three lights (also red). The tiny motherboard fan at the bottom also begins to spins but stops almost immediately. It all happens very quickly, but I've attached a video of it anyway. Even though it started it up with no problems the first time, I can even get it to turn on now. 

 

Any ideas on what might be wrong and how I can fix it? 

 

Thanks guys, all advice welcome. 

Cheers. 

 

 

 

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/
Share on other sites

Link to post
Share on other sites

wait so corsair vs450w with all of those parts? lucky that it has not exploded yet.

 

your cpu need 8+4pin power. And your motherboard 24pin power. See if you have plugged them all in

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/#findComment-13422232
Share on other sites

Link to post
Share on other sites

1 minute ago, Konrad_K said:

at least B-grade:

for htat high end cpu i would get atleast A-. Why did he buy that vs450w in first place. Yes 450w will be enough wattage, but it doesn not usually have the right cables. Like WTF

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/#findComment-13422280
Share on other sites

Link to post
Share on other sites

5 minutes ago, SavageNeo said:

for htat high end cpu i would get atleast A-. Why did he buy that vs450w in first place. Yes 450w will be enough wattage, but it doesn not usually have the right cables. Like WTF

Like I said, I'm completely new at this. From my research, it seemed that having enough wattage was good enough to purchase my power supply. I knew next to nothing about compatible cables, etc. But, I'm living and learning as I go. Thanks for your advice. I will be returning my ps and going for something at least A-, like you suggested. 

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/#findComment-13422302
Share on other sites

Link to post
Share on other sites

9 minutes ago, Konrad_K said:

That power supply was a terrible choice (sorry) - you don't even have the 8+4 pin EPS required by this board. 

Return that and get a better PSU, see the tier list for reference, and get something at least B-grade: 

 

 

 

Thanks for your advice. I will heed it and get a better power supply. Hopefully that's all that's wrong with my build. 

Cheers. 

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/#findComment-13422305
Share on other sites

Link to post
Share on other sites

And also your cpu cooler is not enoguh for workload. For gaming at stock speed it can be neough, but for workloads in stock speed it will not be enough

I Use my knowledge as business owner and self taught technician aswell as an AI to help people. AI might be controversial but it actually works pretty well 90% of the time.

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/#findComment-13422308
Share on other sites

Link to post
Share on other sites

  • 2 weeks later...

Firstly, thank you to everyone that responded. Every review helps in some way. I did buy a new power supply. It’s a EVGA 600W. Unfortunately, though, I am having the same exact problem. Still the CPU red blink and no power. I pulled my motherboard out to make sure there were no broken pins, etc. And all of my cables I believe are in the right place, including my 24 pin power cable.

 

Please help!!!!

 

Link to comment
https://linustechtips.com/topic/1170645-wont-boot/#findComment-13454697
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×