Jump to content
Hi,
First of all sorry for my English, I'm from Argentina.
Now going to the problem that came up.
Not long ago I installed a program, "Autodesk Inventor 2020", when I was at the last stage of the installation, I noticed that the bios LEDs began to flash (like a "bootloop"), it went from the main BIOS LED to the LED of the backup BIOS.
Following this I turned off the PC, then the PSU and drained the power of it. When the PC was turned on again, it started without any "Bootloop" seen with the BIOS LEDs, the only thing I noticed is that the motherboard's LED display went from marking me "A0" to "24". Currently the system seems to work without problems, I only notice that difference.
-Is that a problem with my PC?
-Should I be worried?
-Is there a way to fix this?
Regards,
I am looking forward to your response.

 

My PC components are:
-Ryzen 7 1700
-Gigabyte AX370-Gaming K7
-RX 580 8gb Sapphire LE
-16gb ram (2x8 3200mhz) T-FORCE DELTA
-Stock cooler
-120 ssd storage, 1tb hdd storage, 250g hdd storage.

 

 

 

Link to comment
https://linustechtips.com/topic/1163412-i-need-help/
Share on other sites

Link to post
Share on other sites

your font causes a formatting issue, copying here so people can see it

Spoiler

Hi,
First of all sorry for my English, I'm from Argentina.
Now going to the problem that came up.
Not long ago I installed a program, "Autodesk Inventor 2020", when I was at the last stage of the installation, I noticed that
 the bios LEDs began to flash (like a "bootloop"), it went from the main BIOS LED to the LED of the backup BIOS.
Following this I turned off the PC, then the PSU and drained the power of it. When the PC was turned on again, 
it started without any "Bootloop" seen with the BIOS LEDs, the only thing I noticed is that the motherboard's LED display
 went from marking me "A0" to "24". Currently the system seems to work without problems, I only notice that difference.
-Is that a problem with my PC?
-Should I be worried?
-Is there a way to fix this?
Regards,
I am looking forward to your response.

 


My PC components are:
-Ryzen 7 1700
-Gigabyte AX370-Gaming K7
-RX 580 8gb Sapphire LE
-16gb ram (2x8 3200mhz) T-FORCE DELTA
-Stock cooler
-120 ssd storage, 1tb hdd storage, 250g hdd storage.

 

 

BIOS codes changing during operation is fairly normal, you shouldn't worry.

Edited by Fasauceome

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explainedgroup reg is bad

Link to comment
https://linustechtips.com/topic/1163412-i-need-help/#findComment-13360534
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×