Jump to content

Undervolting = Better result?

ItzUknown

will I get a better result if I undervolt my RTX 2060 SUPER Zotac AMP card because I saw a video with a Zotac card going up to 83 and he set the voltage to 900mv and the card spiked up to 76 degrees max. Will that be the same result as his? 

Link to comment
Share on other sites

Link to post
Share on other sites

Usually people undervolt cause they have bad temps the GPU is in a bad air flow case and thermal throttle.

If your GPU dont go over 80c no need to undervolt.

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites

Link to post
Share on other sites

8 minutes ago, Constantin said:

Usually people undervolt cause they have bad temps the GPU is in a bad air flow case and thermal throttle.

If your GPU dont go over 80c no need to undervolt.

Well it goes up to 81 - 83 and also I have the 280x with a fan mounted as an exhaust at the bottom so I don't know what to do. Tell me your opinion (I am planning on putting 5 other fans in the future) 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, ItzUknown said:

Well it goes up to 81 - 83 and also I have the 280x with a fan mounted as an exhaust at the bottom so I don't know what to do. Tell me your opinion (I am planning on putting 5 other fans in the future) 

populate all the fans, it will fix the air flow problem and the card should run colder

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites

Link to post
Share on other sites

3 minutes ago, Constantin said:

populate all the fans, it will fix the air flow problem and the card should run colder

Ok so, no undervolting. Also shouls I have the fan as an exhaust or an intake? 

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, ItzUknown said:

Ok so, no undervolting. Also shouls I have the fan as an exhaust or an intake? 

All intake, one exhaust in the back running at a little higher RPM

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Constantin said:

All intake, one exhaust in the back running at a little higher RPM

My case does not have an exhaust. O have the Corsair 280x 

Link to comment
Share on other sites

Link to post
Share on other sites

There is a fan spot in the back! make it exhaust!

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Constantin said:

There is a fan spot in the back! make it exhaust!

There is not one 

15830865431522082469921.jpg

Link to comment
Share on other sites

Link to post
Share on other sites

oHH, no, well i guess you will have to make the top exhaust all the rest intake. Try to have a positive pressure with the fans RPM

CPU:i7 9700k 5047.5Mhz All Cores Mobo: MSI MPG Z390 Gaming Edge AC, RAM:Corsair Vengeance LPX 16GB 3200MHz DDR4 OC 3467Mhz GPU:MSI RTX 2070 ARMOR 8GB OC Storage:Samsung SSD 970 EVO NVMe M.2 250GB, 2x SSD ADATA PRO SP900 256GB, HDD WD CB 2TB, HDD GREEN 2TB PSU: Seasonic focus plus 750w Gold Display(s): 1st: LG 27UK650-W, 4K, IPS, HDR10, 10bit(8bit + A-FRC). 2nd: Samsung 24" LED Monitor (SE390), Cooling:Fazn CPU Cooler Aero 120T Push/pull Corsair ML PRO Fans Keyboard: Corsair K95 Platinum RGB mx Rapidfire Mouse:Razer Naga Chroma  Headset: Razer Kraken 7.1 Chroma Sound: Logitech X-540 5.1 Surround Sound Speaker Case: Modded Case Inverted, 5 intake 120mm, one exhaust 120mm.

Link to comment
Share on other sites

Link to post
Share on other sites

On 3/1/2020 at 8:19 PM, Constantin said:

oHH, no, well i guess you will have to make the top exhaust all the rest intake. Try to have a positive pressure with the fans RPM

Οκ!! Then I will make the fan I have mounted in the bottom an intake 

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×