Mz32-ar0 DOA?

[zdenkers]

Finally got my mz32-ar0 mobo from gigabyte so i started puting the new system together. Specs amd epyc 7402p 8x32gb crucial 2933(is on the qvl list) and a samsung 970 evo plus 1tb. I have other hardware for the build too, haven't installed it because i couldnt even post with 1 stick of memory. 

 

Heres what i get on power on:

 

Getting no post. Cpu fan spins up, no beeps. Hot_led lit up, pwok_led lit up, pwgd_led lit up, memgd_led lit up, cpugd_led lit up, stdby_led lit up, reset_led lit up, cpld_led slow flash. Led_bmc also slow flash. Tried reducing to one stick of memory and no other components, no luck. Is my mobo DOA? Or am i missing something. No idea how to troubleshoot this mess with no post codes and no beeps.

[zdenkers]

Not sure what the problem was but now i am getting efi shell and bios and post ipmi all showing up. 

[ipas]

I have exactly the same problem with my new MZ32-AR0. Any pointers ? When booting into the BIOS are all those LEDS still lit ?

 

[jamaicareggae]

if BMC led is blinking, then MegaRAC is working. Here, the BMC led was fixed. The BIOS POST took almost 4 minutes to show up because BIOS waits two minutes for BMC to initialize, and BMC was crashing for some reason. Also for testing initially the board, remember to place RDIMM on A1 slot as the manual suggests, this bite for a while (I did not fill up all memory slots when testing boards usually). After this I got the board to work but it takes more than 1 minute to display the BIOS POST.