Jump to content

problemo #1

Rossco
By Rossco
in Troubleshooting
 Share
Posted
  • Author

Right, but it might be getting some power, but not enough to fully boot up. For example, you could have the 20 pin in, but not the 4 pin. It'll still light up, but it won't post.

 

However, assuming all power connections are in securely, I'll move onto the next most likely components.

 

Is your motherboard grounded properly with the risers? Have you overclocked your cpu? I'm guessing you've at least looked into it as you have the k edition ;).

I haven't even been able to get into the bios to set my boot drive, this is my first time turning it on :(

4770k | GTX 780 | 350D | 16GB RAM | 120GB SSD | 1TB HDD | 750w PSU | Kraken x60 | Custom Sleeved Cables | ASUS PB287Q


 


Build Log 

Link to comment
https://linustechtips.com/topic/115607-problemo-1/page/2/#findComment-1545951
Share on other sites
Link to post
Share on other sites
Posted
  • Author

You've got a debugging LED, what's the code it gives you? Next to the 24pin adapter.

it doesn't give me a code, it doesn't stay on long enough it just cuts off

4770k | GTX 780 | 350D | 16GB RAM | 120GB SSD | 1TB HDD | 750w PSU | Kraken x60 | Custom Sleeved Cables | ASUS PB287Q


 


Build Log 

Link to comment
https://linustechtips.com/topic/115607-problemo-1/page/2/#findComment-1545975
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Then you've either got a PSU issue or a DOA motherboard. Have you got a Voltage Meter?

I think it might be a psu cable issue, when I was sleeving I broke a few of the cables and ghetto repaired them :/

4770k | GTX 780 | 350D | 16GB RAM | 120GB SSD | 1TB HDD | 750w PSU | Kraken x60 | Custom Sleeved Cables | ASUS PB287Q


 


Build Log 

Link to comment
https://linustechtips.com/topic/115607-problemo-1/page/2/#findComment-1546043
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Oh you melon :P.

 

What cables where they?

there was a red one and a yellow one... I'll try re-ghetto fix them...

4770k | GTX 780 | 350D | 16GB RAM | 120GB SSD | 1TB HDD | 750w PSU | Kraken x60 | Custom Sleeved Cables | ASUS PB287Q


 


Build Log 

Link to comment
https://linustechtips.com/topic/115607-problemo-1/page/2/#findComment-1546075
Share on other sites
Link to post
Share on other sites
Posted

Have you tried to build the computer outside the case?  Bench test?  Possible short somewhere.

 

Also, may be a BIOS issue... perhaps it needs to be flashed.

CPU = Intel i7 4770K OC @ 4.1GHz | CPU Cooler = Corsair H105 | MOBO = Asus Z97 Maximus Gene VII | GPU = Asus STRIX 4GB GTX 980 | RAM = 32GB G. Skill Trident X Series @ 2400MHz | PSU = EVGA Supernova 850W 80+ Gold | SSD 1 = 120GB Corsair Neutron (OS) | SSD 2 = 240GB OCZ Vertex 3 (Games) | HDD = 1TB WD Green 7200RPM 64MB Cache (Storage)| OS = Win 8.1 64Bit | Case = Fractal Design Define R4 Blackout Edition w/ Window | KB = RAZER Blackwidow Ultimate 2014 Stealth | MS = Mionix NAOS 7000 | Monitor = 24" BenQ XL2420TE @ 144Hz | 2nd Monitor = 27" Asus VS278Q-P @ 60Hz 
CPU = Intel i7-2700K OC @ 4.5GHz | CPU Cooler = Corsair H100i | MOBO = Asus Maximus V Formula | GPU = EVGA 3GB 780Ti Superclocked w/ ACX Cooler | RAM = 16GB Corsair Vengeance @ 1600MHz | PSU = EVGA Supernova 1,300W 80+ Gold | SSD 1 = 128GB Samsung 840 Pro Series (OS) | SSD 2 = 120GB Kingston HyperX (Games) | HDD = 1TB Seagate 7200RPM 64MB Cache (Storage) | OS = Win 8.1 64Bit | Case = Fractal Design Define XL R2 | KB = ROCCAT ISKU | MS = ROCCAT Kone XTD Optical | Monitor = 24" Asus VG248QE @ 144Hz | 2nd Monitor = 27" Acer G276HLDbmid @ 60Hz       
Link to comment
https://linustechtips.com/topic/115607-problemo-1/page/2/#findComment-1546194
Share on other sites
Link to post
Share on other sites
Posted

I think it might be a psu cable issue, when I was sleeving I broke a few of the cables and ghetto repaired them :/

Well this might be it too... need to try another PSU or sleeve to be sure.

CPU = Intel i7 4770K OC @ 4.1GHz | CPU Cooler = Corsair H105 | MOBO = Asus Z97 Maximus Gene VII | GPU = Asus STRIX 4GB GTX 980 | RAM = 32GB G. Skill Trident X Series @ 2400MHz | PSU = EVGA Supernova 850W 80+ Gold | SSD 1 = 120GB Corsair Neutron (OS) | SSD 2 = 240GB OCZ Vertex 3 (Games) | HDD = 1TB WD Green 7200RPM 64MB Cache (Storage)| OS = Win 8.1 64Bit | Case = Fractal Design Define R4 Blackout Edition w/ Window | KB = RAZER Blackwidow Ultimate 2014 Stealth | MS = Mionix NAOS 7000 | Monitor = 24" BenQ XL2420TE @ 144Hz | 2nd Monitor = 27" Asus VS278Q-P @ 60Hz 
CPU = Intel i7-2700K OC @ 4.5GHz | CPU Cooler = Corsair H100i | MOBO = Asus Maximus V Formula | GPU = EVGA 3GB 780Ti Superclocked w/ ACX Cooler | RAM = 16GB Corsair Vengeance @ 1600MHz | PSU = EVGA Supernova 1,300W 80+ Gold | SSD 1 = 128GB Samsung 840 Pro Series (OS) | SSD 2 = 120GB Kingston HyperX (Games) | HDD = 1TB Seagate 7200RPM 64MB Cache (Storage) | OS = Win 8.1 64Bit | Case = Fractal Design Define XL R2 | KB = ROCCAT ISKU | MS = ROCCAT Kone XTD Optical | Monitor = 24" Asus VG248QE @ 144Hz | 2nd Monitor = 27" Acer G276HLDbmid @ 60Hz       
Link to comment
https://linustechtips.com/topic/115607-problemo-1/page/2/#findComment-1546205
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×