Help, Computer Start but nothing happen

[SnitchMoJo]

Here's the story:

 

Just finish a Heist in GTA Online, close the game and leave my pc running on desktop. Goes into the kitchen to talk to my gf. Come back to my pc 10 minutes later, Screens are black (like in rest mode), mouse and keyboard lit, fans running at 100%. Click on mouse and keyboard, doesnt change anything. Press the reset button, nothing change. Hold the power buttom, doesnt do anything. The only way to shutdown is to close the switch behind the psu.

 

So i shut the psu down, flip the psu on, power the PC, now only one Fan (on 5) spin, nothing on Screen.  

 

I've remove my GPU, change my ram, replug everything, nothing changed

 

So yeah... I need your help

 

PC Specs:

 

Deepcool Matrexx 55 case

Ryzen 5 2600 

ASRock Steel Legend b450

16 GB HyperX DDR4 2666mhz

Gigabyte 2070

Thermaltake Smart Pro RGB 750w (new January 2020)

WD 500GB SSD M.2

WD 1TB SSD

WD 2TB HDD

 

2 x AOC 2590fx

 

[Whiro]

28 minutes ago, SnitchMoJo said:

Here's the story:

 

Just finish a Heist in GTA Online, close the game and leave my pc running on desktop. Goes into the kitchen to talk to my gf. Come back to my pc 10 minutes later, Screens are black (like in rest mode), mouse and keyboard lit, fans running at 100%. Click on mouse and keyboard, doesnt change anything. Press the reset button, nothing change. Hold the power buttom, doesnt do anything. The only way to shutdown is to close the switch behind the psu.

 

So i shut the psu down, flip the psu on, power the PC, now only one Fan (on 5) spin, nothing on Screen.  

 

So yeah... I need your help

 

PC Specs:

 

Deepcool Matrexx 55 case

Ryzen 5 2600 

ASRock Steel Legend b450

16 GB HyperX DDR4 2666mhz

Gigabyte 2070

Thermaltake Smart Pro RGB 750w (new January 2020)

WD 500GB SSD M.2

WD 1TB SSD

WD 2TB HDD

 

2 x AOC 2590fx

 

Try clearing cmos firts.

You can reset the UEFI settings (clear CMOS) by one of the following methods:

 1. Go to the Exit tab in the UEFI and select Load Optimized Defaults.

2. Press the Clear CMOS button on your motherboard (if it has one).

3. Unplug the computer and remove the coin cell battery on the motherboard for a few minutes and then reinsert it.

[SnitchMoJo]

55 minutes ago, Whiro said:

Try clearing cmos firts.

You can reset the UEFI settings (clear CMOS) by one of the following methods:

 1. Go to the Exit tab in the UEFI and select Load Optimized Defaults.

2. Press the Clear CMOS button on your motherboard (if it has one).

3. Unplug the computer and remove the coin cell battery on the motherboard for a few minutes and then reinsert it.

Did step #3, now every fans starts but still no signal on monitor and fans are spinning at 100%

 

Reinstalled my GPU, test my Ram, remove the PSU from the Case and put it next to my case. Replugged everything. Still No Signal to Monitors and still at 100% speed

 

[SnitchMoJo]

Help