Jump to content

Cooling

Pcnoob745
By Pcnoob745
in Cooling
 Share
Posted

Hey guys! My pc is close to finishing. But the front fan is like 3 cm too short. Can i just take a 120mm and hot glue it to the front?

Specifications: 

MOBO: AsRock B450 PRO4

PSU: some kind of Corsair 80+ bronze

CPU: AMD Ryzen 5 3600x

GPU Radeon RX590

RAM 16 GB G.skill Ripjaws 3200mhz

Fans: Xilince and Aerocool

Link to comment
https://linustechtips.com/topic/1146299-cooling/
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Pcnoob745 said:

But the front fan is like 3 cm too short.

how is it too short? Cable too short? Screws too short?

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223698
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Jurrunio said:

how is it too short? Cable too short? Screws too short?

Cable too short

Specifications: 

MOBO: AsRock B450 PRO4

PSU: some kind of Corsair 80+ bronze

CPU: AMD Ryzen 5 3600x

GPU Radeon RX590

RAM 16 GB G.skill Ripjaws 3200mhz

Fans: Xilince and Aerocool

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223724
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Pcnoob745 said:

Cable too short

cant find better positioned fan headers? Use a fan splitter. I dont see why hot gluing a fan will help with this

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223736
Share on other sites
Link to post
Share on other sites
Posted

Splice your front fans together. No problem with that.

AMD R9 9900X | Thermalright FW Pro Black, 3x TL-B12E | Asus Strix X670E -F | 64GB G.Skill 6000C26
Zotac 4070 Ti Trinity OC | WD SN850, SN850X, 2x SN770 | Seasonic Vertex GX-1000 | ProArt PA602
Adcom GFP-345, Adcom GFA-555, S.M.S.L D1+PS100, Cerwin-Vega! CLSC-15, Monster HDP-1800
Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223791
Share on other sites
Link to post
Share on other sites
Posted
  • Author
28 minutes ago, Jurrunio said:

cant find better positioned fan headers? Use a fan splitter. I dont see why hot gluing a fan will help with this

So the original one is 90mm i have a 120 mm lying around

Specifications: 

MOBO: AsRock B450 PRO4

PSU: some kind of Corsair 80+ bronze

CPU: AMD Ryzen 5 3600x

GPU Radeon RX590

RAM 16 GB G.skill Ripjaws 3200mhz

Fans: Xilince and Aerocool

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223812
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Pcnoob745 said:

So the original one is 90mm i have a 120 mm lying around

What case you have?

   @Whiro tag or quote will do the trick 

 

Steam Deck OLED 512gb , all other pc’s are gone 

 

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223819
Share on other sites
Link to post
Share on other sites
Posted
  • Author
4 minutes ago, Whiro said:

What case you have?

I dont know. Its a retired old server case

Specifications: 

MOBO: AsRock B450 PRO4

PSU: some kind of Corsair 80+ bronze

CPU: AMD Ryzen 5 3600x

GPU Radeon RX590

RAM 16 GB G.skill Ripjaws 3200mhz

Fans: Xilince and Aerocool

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223826
Share on other sites
Link to post
Share on other sites
Posted
25 minutes ago, Pcnoob745 said:

So the original one is 90mm i have a 120 mm lying around

then why not use the bigger fan? It should give better airflow for the same noise level, points added for not neeing a splitter to connect to the board

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223861
Share on other sites
Link to post
Share on other sites
Posted
  • Author
22 minutes ago, Jurrunio said:

then why not use the bigger fan? It should give better airflow for the same noise level, points added for not neeing a splitter to connect to the board

Yeah but can i hotglue it?

Specifications: 

MOBO: AsRock B450 PRO4

PSU: some kind of Corsair 80+ bronze

CPU: AMD Ryzen 5 3600x

GPU Radeon RX590

RAM 16 GB G.skill Ripjaws 3200mhz

Fans: Xilince and Aerocool

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223903
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, Pcnoob745 said:

Yeah but can i hotglue it?

hot glue because it doesnt have screw holes for it? Sure.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13223908
Share on other sites
Link to post
Share on other sites
Posted

That’s sounds even a little to ghetto for me.. got a pic?

AMD R9 9900X | Thermalright FW Pro Black, 3x TL-B12E | Asus Strix X670E -F | 64GB G.Skill 6000C26
Zotac 4070 Ti Trinity OC | WD SN850, SN850X, 2x SN770 | Seasonic Vertex GX-1000 | ProArt PA602
Adcom GFP-345, Adcom GFA-555, S.M.S.L D1+PS100, Cerwin-Vega! CLSC-15, Monster HDP-1800
Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13224153
Share on other sites
Link to post
Share on other sites
Posted

Indeed.

AMD R9 9900X | Thermalright FW Pro Black, 3x TL-B12E | Asus Strix X670E -F | 64GB G.Skill 6000C26
Zotac 4070 Ti Trinity OC | WD SN850, SN850X, 2x SN770 | Seasonic Vertex GX-1000 | ProArt PA602
Adcom GFP-345, Adcom GFA-555, S.M.S.L D1+PS100, Cerwin-Vega! CLSC-15, Monster HDP-1800
Link to comment
https://linustechtips.com/topic/1146299-cooling/#findComment-13224277
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×