Front panel to my case.

[Kaspersome]

This will hopefully be about my last problem with building my pc. For some reason on my NZXT H510 case the cable named F panel, which i assumed to be the cable that powers everything is not working. I know its the cable because i can start the power with just metal instead. Here is a video to show what im talking about. Basically im asking, how do i connect my case to my motherboard so when i press the button it turns on??

 

 

 

Help would be very much appreciated.

[Whiro]

40 minutes ago, Kaspersome said:

Help would be very much appreciated

You should have this breaker cable , use it instead.

 

[Kaspersome]

2 minutes ago, Whiro said:

You should have this breaker cable , use it instead.

 

i do have this cable and i tried it, made sure to plug it in correct. Same results as before

[Kaspersome]

11 minutes ago, Whiro said:

You should have this breaker cable , use it instead.

 

i will tell you this though, when either of the cables are plugged in. When i switch the power supply on it turns on briefly like so.

[Whiro]

1 minute ago, Kaspersome said:

i do have this cable and i tried it, made sure to plug it in correct. Same results as before

Remember that power button need to be right way. Easiest way to determine is to check back of the connector for small arrow, that is positive (+) so check this out

 

[Kaspersome]

8 minutes ago, Whiro said:

Remember that power button need to be right way. Easiest way to determine is to check back of the connector for small arrow, that is positive (+) so check this out

 

that explanation was a little off. The only positive and negative signs i see are on my power LED’s. My power switch doesnt have a postive andywhere.

[Whiro]

3 minutes ago, Kaspersome said:

that explanation was a little off. The only positive and negative signs i see are on my power LED’s. My power switch doesnt have a postive andywhere.

 

[Kaspersome]

6 minutes ago, Whiro said:

 

nope, still doesnt work. Everytime i switch the power supply on, it turns on briefly and the lights and stuff work, but when i press the button it does not turn on.

[Whiro]

6 minutes ago, Kaspersome said:

nope, still doesnt work. Everytime i switch the power supply on, it turns on briefly and the lights and stuff work, but when i press the button it does not turn on.

What’s your mobo? I’ll check maybe there is different pin layout 

[Kaspersome]

1 minute ago, Whiro said:

What’s your mobo? I’ll check maybe there is different pin layout 

asrock b450m pro4

[Whiro]

3 minutes ago, Kaspersome said:

asrock b450m pro4

Looks like normal layout of pins. 
Can you take pic how you connected it?

[Kaspersome]

9 minutes ago, Whiro said:

Looks like normal layout of pins. 
Can you take pic how you connected it?

I cant really get a picture in my case like that, but i know its in there exactly how that picture shows. Are you sure the way i put it in could be the only reason? Also i forgot to add, there is no reset SW for me.

[Whiro]

10 minutes ago, Kaspersome said:

but i know its in there exactly how that picture shows

So thats the power button yes?

 

[Kaspersome]

9 minutes ago, Whiro said:

So thats the power button yes?

 

yes, as repeated before when i switch the psu on it seems to turn the computer on briefly when these two are connected as well.

[Whiro]

10 minutes ago, Kaspersome said:

yes, as repeated before when i switch the psu on it seems to turn the computer on briefly when these two are connected as well.

If this connector is inserted properly than only other option is that wire is not connected properly to power switch on case. Specially that you can start it when shorting pins , that means mobo is working properly. Any chance you can have a look on the other side of that wire if its connected to power switch ??

[Kaspersome]

1 minute ago, Whiro said:

If this connector is inserted properly than only other option is that wire is not connected properly to power switch on case. Specially that you can start it when shorting pins , that means mobo is working properly. Any chance you can have a look on the other side of that wire if its connected to power switch ??

yea its hard to get a pic of tho. The white thing is the end of the cable.

[Whiro]

1 minute ago, Kaspersome said:

yea its hard to get a pic of tho. The white thing is the end of the cable.

My advice would be to either try contacting nzxt and tell them you have problem with power switch , maybe they can send you this board with cable , it may work, 

or just rma the whole case

[Kaspersome]

Just now, Whiro said:

My advice would be to either try contacting nzxt and tell them you have problem with power switch , maybe they can send you this board with cable , it may work, 

or just rma the whole case

alright thanks for your time.