Jump to content

Input not support

Hypa
 Share
Posted

I was finishing off a web browsing pc build that hasn't got a dedicated gpu. I get into windows the first time with ease.I finish the setup and allow it to update, when the restart finishes I get a notice that does the typical old school DVD thing jumping across my screen saying "Input not support". I restart the system again same thing... I can boot into bios is there any way I can fix any resolution errors from here.

 

(note this is currently plugged into my 32" widescreen monitor)

 

Any ideas would be really helpful

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

im currently using hdmi the board only has hdmi and VGA output. So vga isnt really an option with the current monitor

 

2 minutes ago, KingTdiGGiTTy said:

What type of input are you using?

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Sounds like your display is sending out wrong resolution / refresh rate information through DDC/CI. You might be able use a analog connection to get a display output or disable DDC/CI in your monitors setting.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I also have a pc plugged into the monitor via display port could this be causing the conflict(although the pc is not turned on)

2 minutes ago, Levent said:

Sounds like your display is sending out wrong resolution / refresh rate information through DDC/CI. You might be able use a analog connection to get a display output or disable DDC/CI in your monitors setting.

 

I just don't understand why pre windows update it booted into windows perfectly on native resolution without issue.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
Just now, Hypa said:

I also have a pc plugged into the monitor via display port could this be causing the conflict(although the pc is not turned on)

 

I just don't understand why pre windows update it booted into windows perfectly on native resolution without issue.

No clue, its either your display sending out wrong information or your windows sending out wrong display output. Check if you can get that monitor to work using a different computer.

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

got it working by booting through bios after a few tweaks, although saying that restarting my main pc again I was getting no display out to the monitor so I'm assuming the monitor was at fault here (another restart fixed everything) thanks for all the feedback guys it was appreciated.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×