Jump to content

Psu connectors for 5700xt Nitro

claudinho7
By claudinho7
in Graphics Cards
 Share
Posted

Ok i know this is a dumb question and it probably should be obvious as it is but im having some issues with the GPU I guess, some games crash sometimes i get a black screen as if the monitor shuts down but the PC still runing sound in the background, sometimes i get flickering especially when I connect the second monitor. 
The GPU is a radeon 5700XT Nitro+ in a x570 elite, 3800x and 750w gold corsair psu, 16gb 3600mhz ram. 
i have it connected to the psu with one 8Pin cable that splits in 2 of 8Pin that both go into the GPU as the nitro is 8+8. 
i have the latest driver so i dont know what the problem is from or if its just damaged.

The dumb question is should i use 2 separare cables from the psu, is it not getting enough power or what?

E4CFFC5C-8DC7-4802-9073-9D7CAF8F8CAF.jpeg

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

This card can draw up to 375W sooo yes you should use two cables 

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

So the one cable that splits in 2 separate 8 pins doesn’t deliver enough? Why does it split in 2 then?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Some cards draw much less power but still require two connectors 

   @Whiro tag or quote will do the trick 
i5 3570K @ 4.7Ghz  |  AsRock Fatal1ty Z77 Performance  |  Corsair Vengeance 16GB 1600MHz  |  ASUS Strix GTX 970 OC  |  Phanteks P400S TG  (mesh panel) |  EVGA 500W1  |  Storage: Corsair 60GB SSD (boot), Gigabyte 120GB SSD, WD 2Tb HDD | Cooling: Custom loop

                EKWB EK-XRES 140 Revo D5 RGB PWM

                EKWB EK Supremacy Evo , naked die

                EKWB EK Thermosphere 

                EKWB EK CoolStream PE 360

                EKWB EK Coolstream SE 120

                EKWB EK Vardar 120s  x6

                EKWB EK STC Classic 10/16  x10

                EKWB EK DuraClear Tubing 16/10

                EKWB EK CryoFuel Acid Green


Laptop: Gigabyte G5-KC | i5 10500H | RTX 3060

                                          WHIRO

         THE FIRST OF DEATH AND DARKNESS

 

        He feast on the dead to inherit their power

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I have 2 conectors in tho as its seen in the photo, but they all from the same cable?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

1. Enhanced Sync is currently broken, disable it.
2. Disable Memory Integrity in WIndows 10 Core Isolation, known issue that could cause crashes.

3. Yeah i read 2 separate cable fixed some instability issues. 

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I dont use that enchaced sync, indid adctivated that gaming mode in adrenaline and when i started the game i would hear a ding ding ding dong sound lke an old atri and after 5 minutes black screen, where do i find that memory integrity?

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
1 hour ago, claudinho7 said:

I dont use that enchaced sync, indid adctivated that gaming mode in adrenaline and when i started the game i would hear a ding ding ding dong sound lke an old atri and after 5 minutes black screen, where do i find that memory integrity?

that ding ding ding is from Anti-Lag features, disable it or mute Radeon Settings.
enhanced sync not automatically enable when you use gaming mode?
just search Core Isolation in start menu.

| Intel i7-3770@4.2Ghz | Asus Z77-V | Zotac 980 Ti Amp! Omega | DDR3 1800mhz 4GB x4 | 300GB Intel DC S3500 SSD | 512GB Plextor M5 Pro | 2x 1TB WD Blue HDD |
 | Enermax NAXN82+ 650W 80Plus Bronze | Fiio E07K | Grado SR80i | Cooler Master XB HAF EVO | Logitech G27 | Logitech G600 | CM Storm Quickfire TK | DualShock 4 |

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Right so back to the cable? The one cable that splits in 2 isn’t enough power? I assumed it brings more power and lets the gpu take as much as it needs

 

also when i search core isolation it says this feature is not supported or available

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Graphics Cards

×