Boot issues

[JustSum]

Lol was having problems with the build didnt want to boot kept going on and off . I had to remove everything just gave me a headache, turns out it was the m.2 wasnt plugged in properly.  Now my problem is it wont boot to windows. Just stays at loading bottom picture.

 

Should i repair or reinstall window.

Or is it some m.2 settings that i I don't know about or something in the bios.

Z390 gigabyte aorus pro

I7 9700k

Samsung 970 

 

[sphbecker]

I can't tell from that screenshot, but is that dot below the logo the Windows 10 spinning circle thing? If so, then Windows is trying to boot and failing. You can try repairing if that is the issue, or reinstalling. If it isn't getting that far, then it could be a BIOS setting or hardware issue.

 

You could try starting the Windows installer and see if it even detects the drive. If it does, then it may just be some kind of boot order or drive ID issue, which could you either try to repair or just reinstall to fix. If it does not detect the drive at all, you clearly have another issue going on.

[JustSum]

1 hour ago, sphbecker said:

I can't tell from that screenshot, but is that dot below the logo the Windows 10 spinning circle thing? If so, then Windows is trying to boot and failing. You can try repairing if that is the issue, or reinstalling. If it isn't getting that far, then it could be a BIOS setting or hardware issue.

 

You could try starting the Windows installer and see if it even detects the drive. If it does, then it may just be some kind of boot order or drive ID issue, which could you either try to repair or just reinstall to fix. If it does not detect the drive at all, you clearly have another issue going on.

I updated the bios and it worked my lord board still had 1st released bios.

[Mustangmatt215]

@JustSum I had the same issue. Is the computer able to get passed that loading screen? Or is it freezing. And aslo if you can get into bios is your cpu being recognized by the computer 

[JustSum]

33 minutes ago, Mustangmatt215 said:

@JustSum I had the same issue. Is the computer able to get passed that loading screen? Or is it freezing. And aslo if you can get into bios is your cpu being recognized by the computer 

No it wasnt hable to get pass loading screen just kept freezing i even tried windows recovery and it also frooze. I think it was a combinations of bios and turning on fast boot. Ill stick with asus and evga board next time. But so far its working with 0 issues.

[Mustangmatt215]

@JustSumDoesn't sound like a bad board to me more like a bad cpu. Do you have another cpu that you could through into that build in the meantime 

[Mustangmatt215]

I was having the same issue wasmt able to Install windows cause Everytime I would get to that screen my computer would freaze up. Turns out I got a bad cpu replaced it and haven't had any issues since

[JustSum]

1 hour ago, Mustangmatt215 said:

@JustSumDoesn't sound like a bad board to me more like a bad cpu. Do you have another cpu that you could through into that build in the meantime 

No no dont get me wrong everything works now, it just didn't want to load because i had old bios and i also had fast boot on the bios , that wasn't letting me boot . I then did a bios update and turned off quick boot now everything works fine.

The board has had like 8 bios update from the one i got.