BSoDs when installing windows 10

[Misa1999]

I have a custom build but I keep on running into problems with it. When I first built it, it worked for about 2 months before I ran into the bsod irql_not_less_or_equal. From there the computer would restart and it would instantly give me the same bsod. I decided to wipe my hard drives and reinstall windows. It worked for about 3 months and then it gave me another bsod (the irql not less or equal) after that it would restart and give me the bsod again. I tried to reinstall windows again, but during the installation process it would stop at around 50% and give me a bsod. Some times it would give me the irql not less or equal and other times it would give me an error that says 0xc000021a and also system service exception and in thge what failed section it said Wimfsf.sys. No matter what I did (use another hard drive, clean the hard drives using the bios menu, removing one ram stick, removing the gpu) it would always give me the same errors. Any help on how to resolve this would be greatly appreciated.

 

Specs

intel i7 8700k
MSI MPG z390 gaming pro carbon ac
Corsair vengeance 8gb 3200MHz
EVGA supernova power supply
Seagate 2tb Barracuda HDD
Western Digital 250gb SDD

[homeap5]

Problem is somewhere in hardware. Use only one stick of memory for test. Try to use memory at lower speed (without X.M.P.).

 

 

[Misa1999]

28 minutes ago, homeap5 said:

Problem is somewhere in hardware. Use only one stick of memory for test. Try to use memory at lower speed (without X.M.P.).

 

 

What speed should I set it to?

[boggy77]

2 minutes ago, Misa1999 said:

What speed should I set it to?

2133 or 2400

[Misa1999]

I set them to their default speeds but I still get the errors

[homeap5]

42 minutes ago, Misa1999 said:

I set them to their default speeds but I still get the errors

Do you also try to use SINGLE stick as I said? Choose one of them - if still you'll get BSOD, use second one.

[pumas]

It might be that your ram is not comlatable with your mobo at the speed you are running it at. Or it could be drivers. Try putting the frequency lower.

[pumas]

2 hours ago, Misa1999 said:

I set them to their default speeds but I still get the errors

What is your gpu. It could be the amd drivers. I have had many problems and BSODS related to drivers