Jump to content

2600X overclocking?

Ben7
 Share
Posted
1 minute ago, Ben7 said:

What kinds of overclocks would I be looking at?

it varies a lot based on luck, although you won't get very far past 4.1GHz on most Ryzen 2nd gen chips.

I WILL find your ITX build thread, and I WILL recommend the SIlverstone Sugo SG13B

 

Primary PC:

i7 8086k - EVGA Z370 Classified K - G.Skill Trident Z RGB - WD SN750 - Jedi Order Titan Xp - Hyper 212 Black (with RGB Riing flair) - EVGA G3 650W - dual booting Windows 11 and Fedora Linux - Black and green theme, Razer brainwashed me.

Draws 400 watts under max load, for reference.

 

PSU tier list

How many watts do I need?

PSU misconceptions, protections explained, group reg is bad

Link to comment
https://linustechtips.com/topic/1123487-2600x-overclocking/#findComment-13044921
Share on other sites
Link to post
Share on other sites
Posted
3 minutes ago, Ben7 said:

Hello, all. I'm approaching build day for my first build, and I've been getting interested in overclocking my chip. I have a Ryzen 5 2600X cooled by a Hyper 212 Black Edition. What kinds of overclocks would I be looking at?

What you want to focus on overclocking is your memory. But you'll probably get stuck around 3200mhz.

If you want to do an all core CPU overclock here's a basic voltage curve anyways. Probably don't want to go over about 1.4V for daily use.


Otherwise it will boost just fine for games on it's own.
 

 

I edit my posts a lot, Twitter is @LordStreetguru just don't ask PC questions there mostly...
 

Spoiler

 

What is your budget/country for your new PC?

 

what monitor resolution/refresh rate?

 

What games or other software do you need to run?

 

 

Link to comment
https://linustechtips.com/topic/1123487-2600x-overclocking/#findComment-13044926
Share on other sites
Link to post
Share on other sites
Posted

Depends on the board and quality of the silicon, 4GHz-4.35GHz is possible with 1.4V, though I dont think this cooler is enough for even 1.35V

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/1123487-2600x-overclocking/#findComment-13044963
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×